Camera Harness (Analog, 2M/5M)

Camera cable for 12-pin connector.
● A straight type harness that can be connected to a standard analog camera terminal.
● Connector Type: Male −Female

· Confirm the continuity before use.
· Any trouble after use will be out of warranty.
· We do not provide failure analysis for this product.
· Check the camera connector pin assignment of the equipment to be used before use.
· Turn off the power supply before inserting/removing the I/O connector.
· When connecting the cable and equipment, check the direction of the connector and then bring in the plug. Excessive insertion/removal may cause damage.
· Make sure not to excessively fix or bend the cable.
(Estimated bending diameter: 14 cm radius or more)
· Use in places where a lot of vibration or impact is present may cause breakage or abnormality.
· Damage to the cable may cause fire or damage.
Observe the following items.
- Do not process or damage the camera cable.
- Do not place heavy objects on it, apply load or pull on it.
- Do not bring it close to hot equipment or heat it up.
- Do not allow water or contaminants inside the connector. Also, be careful of condensation.