MWI Series (Upper/Lower Division)

MWI Series (Upper/Lower Division)
  • Volume Discount

Terminal block with MIL socket connectors wired separately in the upper and lower levels

  • UL
  • Connection in Boards
  • Space-saving
  • Sensor
  • PLC
  • 125 V

● 80 mm width space-saving design is achieved by separately wiring the upper and lower levels
● Same numbers are adopted for the connector number and terminal block name plate
● MIL Socket connector equipped with 40 or 34 cores
● Supports both DIN rail mounting and screw mounting

· Check the specifications of the connector array of each device on equipment side before ordering.

Specification Table

ModelNumber of Poles
MWI-MIL34-HWTB3434
MWI-MIL40-HWTB4040

Overview of Specifications

Connection Information
ModelNumber of PolesMounting connector (male)Recommended harnessWeight of Connector Terminal Block (g)
MWI-MIL34-HWTB343434-Core MIL Socket ConnectorHIFS SeriesApproximately 170
MWI-MIL40-HWTB404040-Core MIL Socket ConnectorApproximately 180
Specifications
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Vibration-ResistantDouble amplitude 1.5 mm / 1 hour (10 to 55 Hz/min)
Impact-Resistant10 G Equivalent
Insulation Resistance100 MΩ or more (500 V DC megger)
Ambient Temperature (Operation)−20 to +80°C
Ambient Temperature (Storage)−20 to +80°C
Relative Temperature45 to 85%
Pitch Between Terminals7 mm
Terminal Block ScrewM3
Tightening Torque0.6 to 0.9 N·m
Conforming Wire1.25 mm2 Max
(2 mm2 Max: When specified crimp terminal is used)
ULE114903
Material
Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass, tin plating
CaseUL94V-0 (Polycarbonate)
Part Number
MWI-MIL34-HWTB34
MWI-MIL40-HWTB40
Part NumberVolume DiscountDays to ShipNumber of connector cores
(Pole)
Number of terminal block electrodes
(Pole)
Available 2 Day(s) or more 3434
Available 2 Day(s) or more 4040

Loading...

  1. 1

Basic Information

Connector MIL connector Terminal Block Screw M3 Mounting Method DIN rail/Direct attachment
Pitch Between Terminals(mm) 7 Supported equipment PLC Representative Standard UL
Dimension vertical(mm) 86 Dimension width(mm) 80 Dimension depth(mm) 42.5
Supported crimp terminal Y Terminal Connector Polarity (Mounted Connector) Female Terminal block screw type Self-Up

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)