• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)

PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)
  • Volume Discount

Connector terminal block that can be directly connected to Mitsubishi Electric PLCs

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

● Drastically reduces wiring work time by matching Mitsubishi Electric PLC circuits.
● Converts the FCN 40 core connector to a 34 pole terminal block (signal 32 terminal and power supply 2 terminal).
● Width is 21 mm smaller than conventional 40 pole sizes.
● The power supply terminal is consolidated to the left side for easy wire connection.
● Input and output units are shared.

· When using an input unit, the 0 V terminal is free and the +V terminal is COM.
· Check equipment-side specifications for PLC pin assignment before ordering.

Part Number

Configured Part Number is shown.


Specification Table

Model NumberConnector
Recommended harness
MWI-F40T34-MT-1FCN 40 CoreNFCN Series

Overview of Specifications

Compatible Mitsubishi Electric PLC
QX41, QX42, QX71, QX72, QY71, QY41P, QY42P, QH42P, QX82-S1, QX82, QX41-S1, QX42-S1, A1SX41/42/71, A1SY41/42/71,
A1SH42, AX42, AY42, A1SX41-S1, A1SX41-S2, A1SX42-S1, A1SX42-S2, A1SX82-S1, A1SY41P, A1SY42P, A1SH42-S1
Rated Voltage125 V
Rated Current0.5 A (Power Supply: 2 A)
Withstand Voltage500 V AC for 1 min.
Insulation Resistance100 MΩ or more (500 V DC megger)
Terminal screwM3x9.8 (Captive Screw)
Tightening Torque0.6 to 0.9 N·m
Ambient Temperature−20 to +80°C
Relative humidity45 to 85%
Mass150 g
Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass
CaseUL94V-0 (Polycarbonate)
Part Number
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more


  1. 1

Basic Information

Connector FCN connector Terminal Block Screw M3 Number of connector cores(Pole) 40
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment PLC
Supported equipment manufacturer Mitsubishi Electric Dimension vertical(mm) 42 Dimension width(mm) 129
Dimension depth(mm) 42.4 Supported crimp terminal Y Terminal Number of terminal block electrodes(Pole) 34
Connector Polarity (Mounted Connector) Female Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWI-F40T34-MT-1 in the PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)