PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)

PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)
  • Volume Discount

Connector terminal block that can be directly connected to Mitsubishi Electric PLCs

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

● Drastically reduces wiring work time by matching Mitsubishi Electric PLC circuits.
● Converts the FCN 40 core connector to a 34 pole terminal block (signal 32 terminal and power supply 2 terminal).
● Width is 21 mm smaller than conventional 40 pole sizes.
● The power supply terminal is consolidated to the left side for easy wire connection.
● Input and output units are shared.

· When using an input unit, the 0 V terminal is free and the +V terminal is COM.
· Check equipment-side specifications for PLC pin assignment before ordering.

Part Number

Configured Part Number is shown.


Specification Table

Model NumberConnector
Recommended harness
MWI-F40T34-MT-1FCN 40 CoreNFCN Series

Overview of Specifications

Compatible Mitsubishi Electric PLC
QX41, QX42, QX71, QX72, QY71, QY41P, QY42P, QH42P, QX82-S1, QX82, QX41-S1, QX42-S1, A1SX41/42/71, A1SY41/42/71,
A1SH42, AX42, AY42, A1SX41-S1, A1SX41-S2, A1SX42-S1, A1SX42-S2, A1SX82-S1, A1SY41P, A1SY42P, A1SH42-S1
Rated Voltage125 V
Rated Current0.5 A (Power Supply: 2 A)
Withstand Voltage500 V AC for 1 min.
Insulation Resistance100 MΩ or more (500 V DC megger)
Terminal screwM3x9.8 (Captive Screw)
Tightening Torque0.6 to 0.9 N·m
Ambient Temperature−20 to +80°C
Relative humidity45 to 85%
Mass150 g
Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass
CaseUL94V-0 (Polycarbonate)
Part Number
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more


  1. 1

Basic Information

Connector FCN connector Terminal Block Screw M3 Number of connector cores(Pole) 40
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment PLC
Supported equipment manufacturer Mitsubishi Electric Dimension vertical(mm) 42 Dimension width(mm) 129
Dimension depth(mm) 42.4 Supported crimp terminal Y Terminal Number of terminal block electrodes(Pole) 34
Connector Polarity (Mounted Connector) Female Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWI-F40T34-MT-1 in the PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)