PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)

PLC Connector Terminal Block (Mitsubishi Electric, For Input/Output)
  • Volume Discount

Screw hold mechanism with spring-type terminal block that can be directly connected to Mitsubishi Electric PLCs

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

● Uses a 34 pole terminal block for a space-saving width of 125 mm
● Screw hold mechanism with spring reduces work hours
● Simple wire connection with both round and Y shaped terminals
● Lower level wiring can be performed without upper level wiring causing obstruction
● Two types of connector available: FCN and MIL
● Supports both DIN rail mounting and screw mounting

· When connecting, check the specifications of the equipment side before use.

Specification Table

ModelInput
Connector
Mass (g)
MWS-F40HT34-MT-3FCN 40 Core181
MWS-M40HT34-MT-3MIL 40 Core177

Overview of Specifications

■ Recommended harnesses:
NFCN-SS-SO
NA40FM-SMIL 
Compatible Mitsubishi Electric PLC
QX41, QX42, QX71, QX72, QY71, QY41P, QY42P, QY82P, QH42P, QX82-S1, QX82, QX41-S1, QX42-S1, A1SX41/42/71, A1SY41/42/71,

A1SH42, AX42, AY42, A1SX41-S1, A1SX41-S2, A1SX42-S1, A1SX42-S2, A1SX82-S1, A1SY41P, A1SY42P, A1SH42-S1LC Series, etc.,

Wire connection unit is shared. Check the pin assignment on the PLC side before using a PLC not indicated. 
 

Specifications
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Insulation Resistance1,000 MΩ or more (500 V DC)
Terminal screwM3 (Screw Hold Mechanism With Spring)
Tightening Torque0.8 N·m max
Applicable WireAWG 22 to 16
Pitch Between Terminals7 mm
Ambient Temperature Range−40°C to +80°C

 
Materials
Terminal BlockPBT (G15)
CasePC
SubstrateGlass Epoxy (FR4)
ScrewSteel, Zinc Plating
Part Number
MWS-F40HT34-MT-3
MWS-M40HT34-MT-3
Part NumberVolume DiscountDays to ShipConnector
Available 2 Day(s) or more FCN connector
Available 2 Day(s) or more MIL connector

Loading...

  1. 1

Basic Information

Terminal Block Screw M3 Number of connector cores(Pole) 40 Mounting Method DIN rail/Direct attachment
Pitch Between Terminals(mm) 7 Supported equipment PLC Supported equipment manufacturer Mitsubishi Electric
Dimension vertical(mm) 42 Dimension width(mm) 125 Dimension depth(mm) 51
Supported crimp terminal Y Terminal / Round Terminal Number of terminal block electrodes(Pole) 34 Connector Polarity (Mounted Connector) Female
Terminal block screw type Spring Up

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)