MWS Series (Screw Hold Mechanism With Spring)

MWS Series (Screw Hold Mechanism With Spring)
  • Volume Discount

Screw hold mechanism with spring-type terminal block equipped with MIL socket connectors

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

● A narrow space saving design
● Screw hold mechanism with spring reduces work hours
● Simple wiring with both round and Y shaped terminals
● Lower level wiring can be performed without upper level wiring causing obstruction
● Sumitomo 3M MIL connector equipped (1 center polarity guide)
● Supports both DIN rail mounting and screw mounting

· The 26 and 50 pole name plates are consecutive serial numbers.
· When connecting, check the specifications of the equipment side before use.
· The 50 core connector type has 1 center polarity guide.



[New Product: MWS-M34-HT34-KV]
34 pole MIL connector terminal block equipped with KEYENCE KV-Nano Series array name plate.
   Conventional MWS-M34-HT34 name plate updated for this terminal block.
Also has KEYENCE PLC pin assignment printed on it for wiring support.
Specifications and size are identical to the MWS-M34-HT34.

 ■ Name Plate Image
MWS Series (Screw Hold Mechanism With Spring): Related Image

MWS Series (Screw Hold Mechanism With Spring): Related Image

■ MWS-M34-HT34-KV Wire Connection Drawing

MWS Series (Screw Hold Mechanism With Spring): Related Image

· Compatible KEYENCE expansion units
  KV-Nano Series: KV-NC32ET
KV-5500
Series: KV-C32TC/C32TD/C32TCP

          
Caution
The basic KV-NC32T unit cannot be used due to a different COM terminal position (COM in center).
Use a general purpose MWS-M34-HT34.

Specification Table

MWS Series (Screw Hold Mechanism With Spring): Related Image
ModelNumber of PolesConnector
Polarity
Weight (g)
MWS-M20-HT2020Male108
MWS-M26-HT2626140
MWS-M34-HT34-KV  34

 177

MWS-M34-HT34
MWS-M40-HT4040207
MWS-M50-HT5050260

Overview of Specifications

MWS Series (Screw Hold Mechanism With Spring): Related Image
MWS Series (Screw Hold Mechanism With Spring): Related Image

· For 50 pole, the terminal number may vary depending on the equipment used.
Make sure to check the wiring between the equipment and the terminal block before ordering.
MWS Series (Screw Hold Mechanism With Spring): Related Image
MWS Series (Screw Hold Mechanism With Spring): Related Image
MWS Series (Screw Hold Mechanism With Spring): Related Image
Material
Terminal BlockPBT (G15)
CasePC
SubstrateGlass Epoxy (FR4)
ScrewSteel, Zinc Plating
Specifications
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Insulation Resistance1,000 MΩ or more (500 VDC)
Terminal screwM3 (Screw Hold Mechanism With Spring)
Tightening Torque0.8 N·m max
Applicable WireAWG 22 to 16
Pitch Between Terminals7 mm
Ambient Temperature Range−40°C to +80°C
Part Number
MWS-M20-HT20
MWS-M26-HT26
MWS-M34-HT34
MWS-M34-HT34-KV
MWS-M40-HT40
MWS-M50-HT50
Part NumberVolume DiscountDays to ShipNumber of connector cores
(Pole)
Supported equipment Supported equipment manufacturer Dimension width
(mm)
Number of terminal block electrodes
(Pole)
Available 2 Day(s) or more 20PLCMitsubishi Electric / Omron7620
Available 2 Day(s) or more 26PLCKeyence9626
Available 1 Day(s) 34PLCMitsubishi Electric / Keyence12534
Available 1 Day(s) 34PLCMitsubishi Electric / Keyence12534
Available 1 Day(s) 40PLCMitsubishi Electric / Omron / Keyence14640
Available 2 Day(s) or more 50ServomotorMitsubishi Electric / Omron / Yasukawa Electric / Panasonic Electronic Works18150

Loading...

  1. 1

Basic Information

Connector MIL connector Terminal Block Screw M3 Mounting Method DIN rail/Direct attachment
Pitch Between Terminals(mm) 7 Dimension vertical(mm) 42 Dimension depth(mm) 51
Supported crimp terminal Y Terminal / Round Terminal Connector Polarity (Mounted Connector) Female Terminal block screw type Spring Up

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)