D-sub Connector, EMI-Countermeasure, One-touch, Resin Hood
Brand :
MISUMI
Caution
Product Description
[Features]A single-action hood that is easy to attach/remove. Can be attached/removed in a short time compared to screw tightening type. The pull-out force when locked is higher than that of the screw tightening type. Compatible with both straight and angled cable exits. Please use appropriate accessories according to the connection purpose.
● It can be mounted and removed in a shorter period of time compared to the screw tightening model
● The pull-out force while locked is higher than the screw tightening model
● The cable pull-out direction can be for both the straight and angle models
· Use the appropriate accessories according to the connection applications.
· This hood cannot be used for the following connectors.
· The panel thickness of the panel fixing bracket [WDH-P-LOCK] is "1.7 ~ 2.0 mm".
* WDH-P-LOCK will be sold as long as there is a stock.
The substitute article is "103-M3T-17002".
It will be changed from inch screws ⇒ metric screws. Other specifications do not change.
Specifications
Hood / Cable Clamp
| Model | Number of Cores (High Density) | Wire Outlet Diameter (mm) | Weight (g) |
| WDH-09 | 9 (15) | 9 | 15 |
| WDH-15 | 15 (26) | 10 | 17 |
| WDH-25 | 25 (44) | 11 | 20 |
| WDH-37 | 37 (62) | 11 | 25 |
| WDH-50 | 50 (78) | 12 | 27 |
| WDH-CLAMP-A | 9 (15) ~ 37 (62) | 3 ~ 9 | 1.5 |
| WDH-CLAMP-B | 50 (78) | 6 ~ 11.5 | 2 |
| 1-pack | 2-piece Pack |
| Model | Connection Type | Weight (g) |
| WDH-R-LOCK | For Relay Connection | 1 |
| WDH-P-LOCK | Panel Fixing Bracket | 2 |
| WDH-K-LOCK | For Fixing Fittings Mount | 0.5 |
Example
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |