D-sub Connector, Complete Set (Hood / Connector)
Brand :
MISUMI
Caution
Product Description
The labor-hours required for selection can be reduced. Press-fit contacts are inexpensive, and machined contacts are highly durable. The hood is for EMI shielding.
● By making the connector and the hood a set, selection labor is reduced.
· For detailed specifications, check each product page.
■ Connector (Press)
■ Connector (Machine)
■ Hood
Specifications
| Series Name | With / Without Hood Plating | Screw Type | Contact Type / Contact Shape | Number of Cores |
| SETDSUB | N (With Plating) | M M2.6 Short U #4-40 Short | PP Press / Male PS Press / Female MP Machine / Male MS Machine / Female | 9 |
| 15 | ||||
| 25 | ||||
| 37 | ||||
| 50 | ||||
| ML M2.6 Long UL #4-40 Long | PP Press / Male PS Press / Female MP Machine / Male MS Machine / Female | 9 | ||
| 15 | ||||
| 25 | ||||
| 37 | ||||
| 50 | ||||
| B (Without Plating) | M M2.6 Short U #4-40 Short | PP Press / Male PS Press / Female MP Machine / Male MS Machine / Female | 9 | |
| 15 | ||||
| 25 | ||||
| 37 | ||||
| 50 | ||||
| ML M2.6 Long UL #4-40 Long | PP Press / Male PS Press / Female MP Machine / Male MS Machine / Female | 9 | ||
| 15 | ||||
| 25 | ||||
| 37 | ||||
| 50 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |