RJ-45 Connector Terminal Block

RJ-45 Connector Terminal Block
  • Volume Discount

Connector terminal block equipped with RJ-45 connectors


● Connector terminal block supplying low power feed and communication signal relay using an inexpensive LAN cable
.
● Also effective for small communication equipment development
● Supports both DIN rail mounting and screw mounting

· Cannot be used for relay of Ethernet (LAN) communication signals.
· Make sure to check the maximum current and voltage of the LAN cable to be used before using for power supply.
.

Part Number

Configured Part Number is shown.

MWH-RJ45

Specification Table

Model
MWH-RJ45

Overview of Specifications

Specifications
Rated Voltage24 V AC/VDC
Rated Current300 mA
Withstand Voltage2,000 V AC for 1 min. (between grounds)
Insulation Resistance100 MΩ or more (500 V DC / between grounds)
Terminal screwM3 x 6L
Tightening Torque0.5 to 0.8 N·m
Conforming Wire1.25 mm 2 Max
Pitch Between Terminals7.62 mm
Operating temperature range-20°C to 75°C
MaterialTerminal Block Main BodyPolybutylene terephthalate (PBT)
Terminal block coverPolycarbonate (PC)
Circuit boardCEM-3
ScrewSteel (trivalent chromate plating)
ConnectorRJ-45 (modular jack)
Weight60 g
Part Number
MWH-RJ45
Part NumberVolume DiscountDays to ShipRoHS
Available 6 Day(s) or more 6

Loading...

  1. 1

Basic Information

Connector Other Terminal Block Screw M3 Number of connector cores(Pole) 10
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7.62 Supported equipment Other
Dimension vertical(mm) 64 Dimension width(mm) 63 Dimension depth(mm) 36.5
Supported crimp terminal Y Terminal / Round Terminal Number of terminal block electrodes(Pole) 10 Connector Polarity (Mounted Connector) Female
Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWH-RJ45 in the RJ-45 Connector Terminal Block series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)