'+com PLC Connector Terminal Block (for KEYENCE KV, KV Nano)

'+com PLC Connector Terminal Block (for KEYENCE KV, KV Nano)
  • Volume Discount

[New Product] PLC terminal block compatible with KEYENCE KV Nano input/output units with combined common terminal block

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V


● Product with the ultimate space saving design
● Terminal block compatible with KEYENCE PLC, KV series and KV-nano series
● KV-nano number (dot matrix), pin assignment number and KV number printed on the terminal block
● Combined common 8 pole and 32 point terminal block (shared power supply)
● Screw hold mechanism with spring reduces work hours
● Simple wiring with both round and Y shaped terminals
● Lower level wiring can be performed without upper level wiring causing obstruction
● Supports both DIN rail mounting and screw mounting



· When connecting, check the specifications of the equipment side before use.
· COM0 and COM1 are independent.
· The basic KV-NC32T unit cannot be used due to a different COM terminal position (COM in center).
Use a general purpose MWS-M34-HT34.


Part Number

Configured Part Number is shown.

MWS-M34T40-KV

Specification Table

■ Compatible Models

KV-5500 Series
Expansion unit
KV-C32TC/C32TD/C32TCP/C32TA
KV-C64TC/C64TD/C64XC/C64XA/C64TA/
KV-C64TCP/KV-C16XTD

KV-C32XTD/C32XC/C32XA

KV Nano Series
Expansion unit
KV-NC32EX/NC32ET/NC16EXT

Other units that share the same registration printing can be used.

 


 

Overview of Specifications

■ Wire Connection Drawing 
 

■ Built-in connector


■ Conforming Crimp Terminal
'+com PLC Connector Terminal Block (for KEYENCE KV, KV Nano): Related Image

■ Name Plate Image



■ Recommended harnesses:
HIFS-SS-□□-34-(length)


Specifications

Rated Voltage 125 VAC, VDC 
 Rated Current 1 A
 Withstand Voltage 500 VAC for 1 min.
 Insulation Resistance 1,000 MΩ or more (500 VDC)
 Terminal screw M3 (Screw Hold Mechanism with Spring)
 Tightening Torque 0.8 N/m max
 Applicable Wire AWG 22 to 16
 Pitch Between Terminals 7 mm
 Ambient Temperature Range -40°C to +80°C


Material
Terminal Block PBT (G15) 
 Case PC
 Substrate Glass Epoxy (FR4)
 Male Screw Steel, Zn plating
 Female screw Brass, Sn plating

 

Part Number
MWS-M34T40-KV
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more

Loading...

  1. 1

Outline drawing

'+com PLC Connector Terminal Block (for KEYENCE KV, KV Nano): Related Image

Basic Information

Connector MIL connector Terminal Block Screw M3 Number of connector cores(Pole) 40
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment PLC
Supported equipment manufacturer Keyence Dimension vertical(mm) 42 Dimension width(mm) 145.5
Dimension depth(mm) 51 Supported crimp terminal Y Terminal / Round Terminal Number of terminal block electrodes(Pole) 40
Registering Plate COM/signal Connector Polarity (Mounted Connector) Female Terminal block screw type Spring Up
Multi-Function Type +CCM terminal

Please check the type/dimensions/specifications of the part MWS-M34T40-KV in the '+com PLC Connector Terminal Block (for KEYENCE KV, KV Nano) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)