Heat Shrink Tubes Fluororubber With 200℃ Heat Resistant
Caution
Product Description
This is an economy item, The price is cheaper than the MISUMI standard product.
[Features]
The outer shrink tube is made from fluoro rubber.
Heat shrink tubing resistant to 200°C
Resistant to diesel fuel jet fuel and heat-resistant liquids
Shrinkage ratio 2:1 to less than 3:1
Operating temperature range -55 to 200°C
Economy Heat Shrink Tube
- High Temperature Resistance: Designed to withstand temperatures up to 200°C.
- Material: Outer layer made of fluororubber for exceptional heat and chemical resistance.
- Shrinkage Ratio: Specified ratio for efficient insulation and protection.
- Chemical Resistance: Resistant to diesel fuel, jet fuel, and heat-resistant fluids.
- Wide Temperature Range: Operates from -55°C to 200°C for versatility.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product of heat shrink tube Overview
● The heat shrink tube outer layer is made of fluoro rubber● heat shrink tube Heat resistant to 200 ℃
● heat shrink tube Can be used at high temperature for a long time, and is resistant to diesel oil, aviation fuel and heat resistant fluid.
● It can be used for protection of military vehicles, high-speed rail and bullet trains, ship equipment or commercial cable terminals, separation and junction areas, etc.
* Note: each roll of heat shrink tube may have 1 to 3 adapters, which conforms to the industry standard and does not affect the quality. Please feel free to use.
Product of heat shrink tube Feature
Dimensional heat shrink tube Drawing
| Part number | Before heat shrink tube (mm) | After heat shrink tube (mm) | ||||||||||
| Inner Diameter D | Inner Diameter d | Wall Thickness h | ||||||||||
| MTUBE-VT-2.4 | ≥2.4 | ≤1.2 | 0.70±0.2 | |||||||||
| MTUBE-VT-3.2 | ≥3.2 | ≤1.6 | 0.76±0.2 | |||||||||
| MTUBE-VT-4.8 | ≥4.8 | ≤2.4 | 0.89±0.2 | |||||||||
| MTUBE-VT-6.4 | ≥6.4 | ≤3.2 | 0.89±0.2 | |||||||||
| MTUBE-VT-9.5 | ≥9.5 | ≤4.8 | 0.89±0.2 | |||||||||
| MTUBE-VT-12.7 | ≥12.7 | ≤6.4 | 0.89±0.2 | |||||||||
Specifications of heat shrink tube Overview
| heat shrink tube Material | heat shrink tube Fluororubber | ||||||||
| Shrinkage Ratio | 2：1 | ||||||||
| Operating Temperature Range | -55~200℃ |
| heat shrink tube Item | heat shrink tube Test Method | heat shrink tube Result | ||||||||||||
| Tensile Strength | ASTM D638 | ≥10MPa | ||||||||||||
| Breakage Elongation | ASTM D638 | ≥300% | ||||||||||||
| Breakage Elongation After Aging | 250℃ 168H | ≥250% | ||||||||||||
| Longitudinal Shrinkage Rate | ≤8% | |||||||||||||
| Withstand Voltage Class | 600V | |||||||||||||
| Dielectric Strength | IEC 243 | ≥15KV/mm | ||||||||||||
| Volume Resistivity | IEC 93 | ≥1014Ω.cm | ||||||||||||
| Thermal Shock | 250℃ 168H | Crack Free, Drip Free | ||||||||||||
Usage of heat shrink tube Method
Example of heat shrink tube Use
