Synchronous Timing Belts 2GT Type

As a mechanism for transmitting the rotational power generated by the motor, synchronous pulleys and timing belts are commonly and widely used in the design.
Transmission and conveyance are achieved through the meshing of the teeth between the synchronous pulley and the timing belt.

Type	Pitch	R1	R2	R3	b	H	h	i	PLD	Unit weight g/m (Width: 10 mm)
2GT	2	0.15	1	0.555	0.4	1.38	0.75	0.63	0.254	13

Operating temperature: -10°C to 80°C (reference value).
For belt width and circumference tolerances, please refer to Belt Length and Width Tolerances
For belt selection, please refer to Timing Belt Selection Method
MISUMI does not guarantee the brand of this product.
The model number on the back of the product is the manufacturer's model number.

Feature 1: Arc-shaped teeth with minimal backlash, suitable for high-precision positioning applications.Feature 2: High-torque timing belt with high tensile strength and load capacity, capable of absorbing shock loads and offering excellent durability.
Performance Comparison between MXL and 2GT Belts

Reference (1): Durability Comparison			Reference (2): Tooth Jump Torque
Operating Conditions			Operating Conditions
Number of belt teeth	: 126		Number of belt teeth	: 126
Belt width	: 9.5 mm		Belt width	: 4.8 mm
Number of pulley teeth	: 12 (2GT) : 14 (MXL)		Number of pulley teeth	: 20 (2GT) : 20 (MXL)
Rotational speed	: 7900 rpm		Rotational speed	: 1130 rpm
Load torque	: 24.3 Nm		Tooth height	: 0.75 mm (2GT) : 0.75 mm (2GT)
			*The skip torque refers to the maximum torque the belt can withstand when tooth skipping occurs.

Feature 3: The glass fiber core provides the belt with high strength, excellent flexibility, and high tensile resistance.

(1) Do not bend the belt forcefully.

(2) Do not use in environments where the belt is in direct contact with water, solvents, oil, acids, alkalis, ultraviolet rays, ozone, etc.
 In particular, do not allow oil to adhere to the belt, as this may cause swelling and significantly shorten the belt's service life.(3) Avoid using or storing in extremely high or low temperatures or humid environments that exceed the recommended operating temperature range.
(4) When installing, maintaining, or inspecting, be sure to disconnect the power supply and confirm that the machine has come to a complete stop before starting any work.
(5) If there is a possibility that foreign objects may become caught, be sure to install a protective cover.

Reference materials for synchronous timing belt selection:

[Step 1]	Determine the necessary conditions for the design. Please refer to Synchronous Timing Belt Selection Method 1
[Step 2]	Calculate the design power. Please refer to Synchronous Timing Belt Selection Method 1
[Step 3]	Provisionally determine the belt type using the simplified selection table. Please refer to Timing Belt Selection Method 2
[Step 4]	Determine the number of teeth on the large and small pulleys, belt length, and center distance. Please refer to Timing Belt Selection Method 2
[Step 5]	Determine the belt width. Please refer to Timing Belt Selection Method 2
[Step 6]	Check whether the adjustment range of the center distance is appropriate. Please refer to Timing Belt Selection Method 3
[Step 7]	Check the transmission capacity. Please refer to Timing Belt Selection Method 4
Other	Precautions when using the belt (main causes of premature failure and corresponding countermeasures). Please refer to Reference Information for Timing Belts