EMI Countermeasures Cable/Slim-model Connector

Brand :

MISUMI

Caution

Product Description

Harness using connectors made by Japanese manufacturers

● Hardly interferes with other equipment as the hood is thin.
● Wiring is easy thanks to narrow and soft cables with diameter thinness 35% that of conventional cables.
● By taking advantage of the free alteration / custom number, simple customized connection changes and mark tube printing etc. can be performed.

· Please use within a range of 15 m or less if used in RS-232C communication.
· Small diameter cables support 30V.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.

Wiring and Wire Color Page >>Click here
Component Page >>Click here

Specifications

EMI Countermeasures Cable/Slim-model Connector:Related Image

Connector Type	Shape Specification Type	Outline Image Drawing	Cable Type	Number of Cores	Specified Length (m)


NDDJ EMI Countermeasure M2.6 Short Screw DDK NDDU EMI Countermeasure #4-40 Short Screw DDK	P (Male)			9	0.2 ~ 50 Can be specified by 0.1m increments
				15
				25
				37
	S (Female)			9
				15
				25
				37
	PP (Male / Male)			9
				15
				25
				37
	SS (Female / Female)			9
				15
				25
				37
	PS (Male / Female)			9
				15
				25
				37

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


NDDJ EMI Countermeasure M2.6 Short Screw DDK NDDU EMI Countermeasure #4-40 Short Screw DDK	PY (Male / Y Terminal) With Pin No. Insertion Mark Tube			9	0.2 ~ 50 Can be specified by 0.1m increments
				15
				25
				37
	SY (Female / Y Terminal) With Pin No. Insertion Mark Tube			9
				15
				25
				37
	PT (Male / Loose Wires) With Pin No. Insertion Mark Tube			9
				15
				25
				37
	ST (Female / Loose Wires) With Pin No. Insertion Mark Tube			9
				15
				25
				37
	PU (Male / Fusion)			9	1 ~ 50 Can be specified by 0.1m increments
				15
				25
				37

Compatible Wire Size

Connector Type		Compatible Wire Size
Connector Type		AWG Size	Conductor Cross-Sectional Area (mm2)
Solder Connection Type		Finer than 20	Less than 0.53
Pressure Weld Connection Type		1.27 mm Pitch 28 Flat Cable	−
High-density Solder Connection Type		22 ~ 28	0.08 ~ 0.32
Terminal Block Built in Type		14 ~ 26	2.0 ~ 1.5
High Current Type	For 10A	16 ~ 12	0.3 ~ 1.25
High Current Type	For 20A	12 ~ 18	0.75 ~ 3.5

・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type

● Dimension Table

Number of Cores			A±0.15	B±0.2	C±0.2
High Current Type	High-density type	Others	A±0.15	B±0.2	C±0.2
-	15	9	24.99	20.6	12.0
3	26	15	33.32	28.8	12.0
5	44	25	47.04	42.6	12.0
8	62	37	63.50	59.0	12.0
-	78	50	61.11	56.6	15.2

Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front

● Dimension Table

Number of Cores	A1	B1
9	24.99	22.00
15	33.32	30.30
25	47.04	44.00
37	63.05	60.50

b. Dimensions when mounting the connector from panel rear

● Dimension Table

Number of Cores	A2	B2
9	24.99	20.20
15	33.32	28.60
25	47.04	42.50
37	63.05	59.20

Contact Arrangement Diagram

Shell Size Group	E	A	B	C	D
Standard Type
High-density type