General Purpose EMI Countermeasures Cable/Slim-model Connector
Brand :
MISUMI
Caution
Product Description
The harness adopts OMRON low profile hood, which is less likely to interfere with devices.
[Features]
·connector, hood: Manufactured by Omron
·Cable: Double-shielded, thin flexible, oil-resistant, and a wide variety of cable types (6 types) to choose from.
·Overall Length: The length can be specified in 0.1 m increments from a minimum of 0.2 m to a maximum of 50 m.
·Free combination with connectors on both ends, Y terminal on one side, etc.
·EMI countermeasure hood, general-purpose plastic hood
·Selectable from 2 types: M2.6 short screw and #4-40 short screw
● Hardly interferes with other equipment as the hood is thin.
● Wiring is easy thanks to narrow and soft cables with diameter thinness 35% that of conventional cables.
● By taking advantage of the free alteration / custom number, simple customized connection changes and mark tube printing etc. can be performed.
· Please use within a range of 15 m or less if used in RS-232C communication.
· Small diameter cables support 30V.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· The combination of the D-sub connector and other connectors' cables can be handled with the "Web Design Harness Plus."
Wiring and Wire Color Page >>Click here
Component Page >>Click here
Specifications
| L (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Total Length |
| Connector Type | Shape Specification Type | Outline Image Drawing | Cable Type | Number of Cores | Specified Length (m) |
| NSDJ EMI Countermeasure M2.6 Short Screw Omron NSDU EMI Countermeasure #4-40 Short Screw Omron | P (Male) |  |
| 9 | 0.2 ~ 50 Can be specified at 0.1 m increments |
| 15 | |||||
| 25 | |||||
| 37 | |||||
| S (Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PP (Male / Male) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| SS (Female / Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PS (Male / Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| NSDJ EMI Countermeasure M2.6 Short Screw Omron NSDU EMI Countermeasure #4-40 Short Screw Omron | PY (Male / Y Terminal) With Pin No. Insertion Mark Tube |  |
| 9 | 0.2 ~ 50 Can be specified at 0.1 m increments |
| 15 | |||||
| 25 | |||||
| 37 | |||||
| SY (Female / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PT (Male / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| ST (Female / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PD9P (25-core Male / 9-core Male) |  | 25 | |||
| PD9S (25-core Male / 9-core Female) |  | 25 | |||
| PMD6 (D-sub Male / miniDIN Mold 6-core Male) |  |  | 25 | 0.2 ~ 15 Can be specified at 0.1 m increments | |
| PMD8 (D-sub Male / miniDIN Mold 8-core Male) |  | 9 | |||
| 25 | |||||
| SMD6 (D-sub Female / miniDIN Mold 6-core Male) |  | 9 | |||
| SMD8 (D-sub Female / miniDIN Mold 8-core Male) |  | 9 | |||
| 25 | |||||
| SRJ (D-sub 9-core Female / RJ11 Modular) |  |  | 9 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |