Cable with Dsub connector EMI measures, high density (3 rows) selectable type

Brand :

MISUMI

Caution

Product Description

Harness using connectors made by Japanese manufacturers

● Wiring is easy thanks to narrow and soft cables with diameter thinness 35% that of conventional cables.
● By taking advantage of the free alteration / custom number, simple customized connection changes and mark tube printing etc. can be performed.

· Please use within a range of 15 m or less if used in RS-232C communication.
· Small diameter cables support 30V.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· High density (3-row) model for core numbers H15, 44 & 62.
· The shield is connected inside the hood.
· The combination of the D-sub connector and other connectors' cables can be handled with the "Web Design Harness Plus."

Wiring and Wire Color Page >>Click here
Component Page >>Click here

Specifications

General Purpose EMI Countermeasure Cable:Related Image

L (m)	~ 0.9	1 ~ 4	4.1 ~ 50
Tolerance	+20mm	+50mm	+ 3% of Total Length

* The tolerance of the specified length is as described above.

Connector Type	Shape Specification Type	Outline Image Drawing	Cable Type	Number of Cores	Specified Length (m)


NEDJ EMI Countermeasure M2.6 Short Screw Japan Aviation Electronics Industry, Limited NEDJL EMI Countermeasure M2.6 Long Screw Japan Aviation Electronics Industry, Limited NEDU EMI Countermeasure #4-40 Short Screw Japan Aviation Electronics Industry, Limited NEDUL EMI Countermeasure #4-40 Long Screw Japan Aviation Electronics Industry, Limited	P (Male)			9	0.2 ~ 50 Can be specified by 0.1m increments
				15
				H15
				25
				37
				44
				50
				62
	S (Female)			9
				15
				H15
				25
				37
				44
				50
				62
	PP (Male / Male)			9
				15
				H15
				25
				37
				44
				50
				62
	SS (Female / Female)			9
				15
				H15
				25
				37
				44
				50
				62
	PS (Male / Female)			9
				15
				H15
				25
				37
				44
				50
				62

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


NEDJ EMI Countermeasure M2.6 Short Screw Japan Aviation Electronics Industry, Limited NEDJL EMI Countermeasure M2.6 Long Screw Japan Aviation Electronics Industry, Limited NEDU EMI Countermeasure #4-40 Short Screw Japan Aviation Electronics Industry, Limited NEDUL EMI Countermeasure #4-40 Long Screw Japan Aviation Electronics Industry, Limited	PY (Male / Y Terminal) With Pin No. Insertion Mark Tube			9	0.2 ~ 50
				15
				H15
				25
				37
				44
				50
				62
	SY (Female / Y Terminal) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
				44
				50
				62
	PT (Male / Loose Wires) With Pin No. Insertion Mark Tube			9	Can be specified by 0.1m increments
				15
				H15
				25
				37
				44
				50
				62
	ST (Female / Loose Wires) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
				44
				50
				62

Compatible Wire Size

Connector Type		Compatible Wire Size
Connector Type		AWG Size	Conductor Cross-Sectional Area (mm2)
Solder Connection Type		Finer than 20	Less than 0.53
Pressure Weld Connection Type		1.27 mm Pitch 28 Flat Cable	−
High-density Solder Connection Type		22 ~ 28	0.08 ~ 0.32
Terminal Block Built in Type		14 ~ 26	2.0 ~ 1.5
High Current Type	For 10A	16 ~ 12	0.3 ~ 1.25
High Current Type	For 20A	12 ~ 18	0.75 ~ 3.5

・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type

● Dimension Table

Number of Cores			A±0.15	B±0.2	C±0.2
High Current Type	High-density type	Others	A±0.15	B±0.2	C±0.2
-	15	9	24.99	20.6	12.0
3	26	15	33.32	28.8	12.0
5	44	25	47.04	42.6	12.0
8	62	37	63.50	59.0	12.0
-	78	50	61.11	56.6	15.2

Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front

● Dimension Table

Number of Cores	A1	B1
9	24.99	22.00
15	33.32	30.30
25	47.04	44.00
37	63.05	60.50

b. Dimensions when mounting the connector from panel rear

● Dimension Table

Number of Cores	A2	B2
9	24.99	20.20
15	33.32	28.60
25	47.04	42.50
37	63.05	59.20

Contact Arrangement Diagram

Shell Size Group	E	A	B	C	D
Standard Type
High-density type