Cable with Dsub connector high EMI countermeasure type
Brand :
MISUMI
Caution
Product Description
Cable that converts sound energy into heat is used
● Features the D-sub connector that can be used for connection of various control devices, PCs, etc. Features two models of cables: the noiseBEAT cable that reduces noise by heat conversion, and the pair-shielded twisted pair cable that is aluminum foil coated.
· Please use within a range of 15 m or less if used in RS-232C communication.
· The noiseBEAT cable is a registered trademark of NTT Advanced Technology Corporation.
· The temperature increase by the heat conversion of the noise is roughly 0.1°C.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· Custom number for common crossover connection is available in RS-232C cables.
· High density (3-row) model for core number H15.
Wiring and Wire Color Page
>>Click here
Component Page
>>Click here
Specifications
| L (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Total Length |
| Connector Type | Shape Specification Type | Outline Image Drawing | Cable Type | Number of Cores | Specified Length (m) |
| SPEDJ EMI Countermeasure M2.6 Short Screw Japan Aviation Electronics Industry, Limited SPEDJL EMI Countermeasure M2.6 Long Screw Japan Aviation Electronics Industry, Limited SPEDU EMI Countermeasure #4-40 Short Screw Japan Aviation Electronics Industry, Limited SPEDUL EMI Countermeasure #4-40 Long Screw Japan Aviation Electronics Industry, Limited | P (Male) |  |   | 9 | 0.2 ~ 50 Can be specified at 0.1 m increments |
| 15 | |||||
| H15 | |||||
| 25 | |||||
| S (Female) |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| PP (Male / Male) |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| SS (Female / Female) |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| PS (Male / Female) |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| SPEDJ EMI Countermeasure M2.6 Short Screw Japan Aviation Electronics Industry, Limited SPEDJL EMI Countermeasure M2.6 Long Screw Japan Aviation Electronics Industry, Limited SPEDU EMI Countermeasure #4-40 Short Screw Japan Aviation Electronics Industry, Limited SPEDUL EMI Countermeasure #4-40 Long Screw Japan Aviation Electronics Industry, Limited | PY (Male / Y Terminal) With Pin No. Insertion Mark Tube |  |   | 9 | 0.2 ~ 50 Can be specified at 0.1 m increments |
| 15 | |||||
| H15 | |||||
| 25 | |||||
| SY (Female / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| PT (Male / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| ST (Female / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |