Cable with Dsub connector with loose wire hood
Brand :
MISUMI
Caution
Product Description
Wiring inside the board is easy with loose wires
● It is very convenient for the wiring of various I/O devices and PLC inside control panels. Wires are available in a total of 5 colors, with yellow for AC, blue for DC, and red, white and black for multiple purposes.
● Mark tube printing is possible when a custom number is used.
· Core number H15 is high-density model.
Wiring and Wire Color Page >>Click here
Specifications
| L (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 10 |
| Tolerance | +20mm | +50mm | + 3% of Total Length |
| Connector Type | Shape Specification Type | Outline Image Drawing | Wire Type | Number of Cores | Specified Length (m) |
| BHDJ M2.6 Short Screws with Universal Resin Hood Japan Aviation Electronics Industry, Limited BHDJL M2.6 Long Screws with Universal Resin Hood Japan Aviation Electronics Industry, Limited BHDU #4-40 Short Screws with Universal Resin Hood Japan Aviation Electronics Industry, Limited BHDUL #4-40 Long Screws with Universal Resin Hood Japan Aviation Electronics Industry, Limited | PT (Male) With Pin No. Insertion Mark Tube |  | A Yellow B Blue C White D Black E Red UL1007 AWG24 Equivalent Product | 9 | 0.2 ~ 10 Can be specified by 0.1m increments |
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| ST (Female) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| PY (Male / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| SY (Female / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| PR (Male / Round Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| SR (Female / Round Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |