BDDN/BDDJ/BDDU Discrete Wire Cables with Hoodless Connectors

Brand :

MISUMI

Caution

Product Description

Without hood so wiring within narrow instruments is easy

● It is very convenient for the wiring of various I/O devices and PLC inside control panels. Wires are available in a total of 5 colors, with yellow for AC, blue for DC, and red, white and black for multiple purposes.
● Mark tube printing is possible when a custom number is used.

· Core number H15 is high-density model.
· When the mark tube has no printed custom number specified, the connector pin number is printed.

Component Page >>Click here

Specifications

Discrete Wire Cable with Hoodless Connector:Related Image

L (m)	~ 0.9	1 ~ 4	4.1 ~ 10
Tolerance	+20mm	+50mm	+ 3% of Total Length

* The tolerance of the specified length is as described above.

Connector Type	Shape Specification Type	Outline Image Drawing	Wire Type	Number of Cores	Specified Length (m)

BDDN Without Lock Nut Japan Aviation Electronics Industry, Limited BDDJ With M2.6 Hex Lock Nut Japan Aviation Electronics Industry, Limited BDDU With #4-40 Hex Lock Nut Japan Aviation Electronics Industry, Limited	P (Male)		A Yellow B Blue C White D Black E Red UL1007 AWG24 Equivalent Product	9
				15
				H15
				25
				37
	S (Female)			9
				15
				H15
				25
				37
	PT (Male) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
	ST (Female) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
	PY (Male / Y Terminal) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
	SY (Female / Y Terminal) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
	PR (Male / Round Terminal) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37
	SR (Female / Round Terminal) With Pin No. Insertion Mark Tube			9
				15
				H15
				25
				37

Compatible Wire Size

Connector Type		Compatible Wire Size
Connector Type		AWG Size	Conductor Cross-Sectional Area (mm2)
Solder Connection Type		Finer than 20	Less than 0.53
Pressure Weld Connection Type		1.27 mm Pitch 28 Flat Cable	−
High-density Solder Connection Type		22 ~ 28	0.08 ~ 0.32
Terminal Block Built in Type		14 ~ 26	2.0 ~ 1.5
High Current Type	For 10A	16 ~ 12	0.3 ~ 1.25
High Current Type	For 20A	12 ~ 18	0.75 ~ 3.5

・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type

● Dimension Table

Number of Cores			A±0.15	B±0.2	C±0.2
High Current Type	High-density type	Others	A±0.15	B±0.2	C±0.2
-	15	9	24.99	20.6	12.0
3	26	15	33.32	28.8	12.0
5	44	25	47.04	42.6	12.0
8	62	37	63.50	59.0	12.0
-	78	50	61.11	56.6	15.2

Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front

● Dimension Table

Number of Cores	A1	B1
9	24.99	22.00
15	33.32	30.30
25	47.04	44.00
37	63.05	60.50

b. Dimensions when mounting the connector from panel rear

● Dimension Table

Number of Cores	A2	B2
9	24.99	20.20
15	33.32	28.60
25	47.04	42.50
37	63.05	59.20

Contact Arrangement Diagram

Shell Size Group	E	A	B	C	D
Standard Type
High-density type