Discrete Wire Cable with Hoodless Connector
Brand :
MISUMI
Caution
Product Description
Without hood so wiring within narrow instruments is easy
● It is very convenient for the wiring of various I/O devices and PLC inside control panels. Wires are available in a total of 5 colors, with yellow for AC, blue for DC, and red, white and black for multiple purposes.
● Mark tube printing is possible when a custom number is used.
· Core number H15 is high-density model.
· When the mark tube has no printed custom number specified, the connector pin number is printed.
Component Page >>Click here
Specifications
| L (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 10 |
| Tolerance | +20mm | +50mm | + 3% of Total Length |
| Connector Type | Shape Specification Type | Outline Image Drawing | Wire Type | Number of Cores | Specified Length (m) |
| BDDN Without Lock Nut Japan Aviation Electronics Industry, Limited BDDJ With M2.6 Hex Lock Nut Japan Aviation Electronics Industry, Limited BDDU With #4-40 Hex Lock Nut Japan Aviation Electronics Industry, Limited | P (Male) |  | A Yellow B Blue C White D Black E Red UL1007 AWG24 Equivalent Product | 9 |  |
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| S (Female) |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| PT (Male) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| ST (Female) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| PY (Male / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| SY (Female / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| PR (Male / Round Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 | |||||
| SR (Female / Round Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| H15 | |||||
| 25 | |||||
| 37 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |