Pressure-welded/Press Contact D-Sub Connector
Brand :
MISUMI
Caution
Product Description
Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force
● Common, widely-used pressure weld model D-sub connectors. Since the connector shell is given nickel plating, you can take advantage of the EMI effect in the connection with a connector with EMI protection to the fullest.
● The connector's rear part comes with a metal strain relief (cable bracket) providing excellent tensile strength etc.
| Rated Current | Rated Voltage | Withstand Voltage (1 minute) | Insulation Resistance (500V DC) | Contact Resistance | Operating Temperature |
| 1A | 200V AC | 650 VACr.m.s | 1000 MΩ or more | 25 mΩ or less (DC 0.1 A) | -20°C – +80°C |
· The hood is not attached to the connector, so purchase separately.
· As a rule, use the dedicated pressure welding tools for pressure welding of the connectors. However, simple pressure welding tools are also available from Misumi. If this is the case, thoroughly check the finish after connecting before using the connector.
· Only flat cables with a 1.27 mm pitch or round cables that have been fused into a flat cable form can be used for connection.
Specifications
| Model Number | Number of Cores | Type | Weight (g) |
| FDE-9P05 | 9 | Male (Pin) | 8.9 |
| FDA-15P05 | 15 | 11.8 | |
| FDB-25P05 | 25 | 17.4 | |
| FDC-37P05 | 37 | 23.0 | |
| FDE-9PF05 | 9 | Male (Pin) Dimple Processing | 7.6 |
| FDA-15PF05 | 15 | 10.5 | |
| FDB-25PF05 | 25 | 15.9 | |
| FDC-37PF05 | 37 | 22.8 | |
| FDE-9S05 | 9 | Female (Socket) | 8.1 |
| FDA-15S05 | 15 | 11.4 | |
| FDB-25S05 | 25 | 17.1 | |
| FDC-37S05 | 37 | 23.6 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |