D-sub Connector, Crimped/Press Contact
Brand :
MISUMI
Caution
Product Description
Crimp contact that supports wiring sizes up to AWG18
● This is a dedicated contact to be incorporated into the EMI crimp connector housing.
· For crimping, use the dedicated tool.
Specifications
1-pack 100-piece Pack
| Model | Contact Size | Type | Applicable Electric Wire | Weight (g) | ||
| AWG Size | Conductor Section Area mm2 | Insulation OD (mm) | ||||
| DC-20-18P-PKG100 | 20-18 | Male (Pin) | #18 ~ #22 | 0.81 ~ 0.32 | Ø1.95 or less | 0.10 |
| DC-20-22P-PKG100 | 20-22 | #22 ~ #24 | 0.32 ~ 0.21 | Ø1.2 ~ Ø1.7 | 0.10 | |
| DC-20-24P-PKG100 | 20-24 | #24 ~ #28 | 0.21 ~ 0.08 | Ø0.8 ~ Ø1.5 | 0.10 | |
| DC-20-18S-PKG100 | 20-18 | Female (Socket) | #18 ~ #22 | 0.81 ~ 0.32 | Ø1.95 or less | 0.11 |
| DC-20-22S-PKG100 | 20-22 | #22 ~ #24 | 0.32 ~ 0.21 | Ø1.2 ~ Ø1.7 | 0.11 | |
| DC-20-24S-PKG100 | 20-24 | #24 ~ #28 | 0.21 ~ 0.08 | Ø0.8 ~ Ø1.5 | 0.11 | |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |