Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)
Brand :
MISUMI
Caution
Product Description
Hood with integrated screw model terminal that allows for repeated connecting with a single driver
●The screw model terminal block wire connection allows for the wire connections to be changed as many times as you like. Therefore, it is ideal for inspection jigs etc.
● The cable outlet can be angled either right or left depending on the mounting direction of the hood.
· For wire connection, confirm that the screws are securely tightened and mount the hood before use.
· #4-40 inch screws for fixing to mating component are installed as standard. Replace with the included M2.6 screws when using with M2.6 screws.
Specifications
| Model Number | Number of Cores | Type | Weight g |
| SUBCON9M-SH | 9 | Male (Pin) | 45.4 |
| SUBCON15M-SH | 15 | 52.8 | |
| SUBCON25M-SH | 25 | 70.4 | |
| SUBCON9F-SH | 9 | Female (Socket) | 44.9 |
| SUBCON15F-SH | 15 | 51.0 | |
| SUBCON25F-SH | 25 | 69.0 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |