EMI Countermeasure D-Sub Connector with Aluminum Die-cast Hood
Brand :
MISUMI
Caution
Product Description
Sturdy and Lightweight D-sub Hood Made of Aluminum
● Since the hood body is made of die-cast aluminum, it is robust yet lightweight.
● As it is nickel plated and unique steps are made on the mating grooves of 2 hoods which reliably cover the connector flange, it is excellent for EMI countermeasures.
· Square lock bracket model for hood-to-hood relay cannot be used for this hood. Use the hexagon model when relaying.
· This hood cannot be used for the following connectors.
EMI Pressure Welding D-sub
High-Current D-sub
Specifications
| Model | Number of Cores | Screw Type | Weight (g) |
| DE-C4-J6 | 9 (15) | M2.6 Short | 31.40 |
| DA-C4-J10 | 15 (26) | 41.60 | |
| DB-C4-J11 | 25 (44) | 56.00 | |
| DC-C4-J12 | 37 (62) | 63.40 | |
| DD-C4-J13 | 50 (78) | 82.10 | |
| DE-C4-J6-S1 | 9 (15) | #4-40 Short | 31.40 |
| DA-C4-J10-S1 | 15 (26) | 41.40 | |
| DB-C4-J11-S1 | 25 (44) | 54.50 | |
| DC-C4-J12-S1 | 37 (62) | 63.60 | |
| DD-C4-J13-S1 | 50 (78) | 83.60 | |
| DE-C4-J6-F | 9 (15) | M2.6 Long | 37.60 |
| DA-C4-J10-F | 15 (26) | 44.60 | |
| DB-C4-J11-F | 25 (44) | 61.60 | |
| DC-C4-J12-F | 37 (62) | 69.70 | |
| DD-C4-J13-F | 50 (78) | 89.40 | |
| DE-C4-J6-F1 | 9 (15) | #4-40 Long | 37.60 |
| DA-C4-J10-F1 | 15 (26) | 44.40 | |
| DB-C4-J11-F1 | 25 (44) | 61.60 | |
| DC-C4-J12-F1 | 37 (62) | 69.70 | |
| DD-C4-J13-F1 | 50 (78) | 89.40 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |