EMI Countermeasures D-Sub Connector with Resin Hood
Brand :
MISUMI
Caution
- Please note some product will be discontinued after stock keeping quantity are sold.
Product Description
Select screw model or plated / non-plated to suit the application
● EMI (electromagnetic interference) countermeasure model with surface nickel plating and general-purpose model are available.
● For the fixing screws, the short screw model to be fixed by a screwdriver and long screw model that can be fixed by hand are available. For each, select from M2.6 metric screws and #4-40 inch screws according to the application.
· This hood cannot be used for the following connectors.
EMI Pressure Welding D-sub
High-Current D-sub
Specifications
| Number of Cores Parentheses show high-density type | Screw Type | EMI Countermeasure Resin Hood (Nickel Plated) | Weight g | General-purpose Resin Hood (Black) | Weight g |
| Model | Model | ||||
| 9 (15) | M2.6 Short | DE-C8-J9-F11R | 15.8 | DE-C8-J9-B11R | 13.7 |
| 15 (26) | DA-C8-J10-F11R | 15.4 | DA-C8-J10-B11R | 17 | |
| 25 (44) | DB-C8-J10-F11R | 21.7 | DB-C8-J10-B11R | 22.9 | |
| 37 (62) | DC-C8-J13-F11R | 22.7 | DC-C8-J13-B11R | 28.2 | |
| 50 (78) | DD-C8-J13-F11R | 29.2 | DD-C8-J13-B11R | 28.9 | |
| 9 (15) | #4-40 Short | DE-C8-J9-F21R | 14.6 | DE-C8-J9-B21R | 14.9 |
| 15 (26) | DA-C8-J10-F21R | 15.6 | DA-C8-J10-B21R | 17.4 | |
| 25 (44) | DB-C8-J10-F21R | 21.6 | DB-C8-J10-B21R | 22.9 | |
| 37 (62) | DC-C8-J13-F21R | 22.9 | DC-C8-J13-B21R | 33 | |
| 50 (78) | DD-C8-J13-F21R | 28.7 | DD-C8-J13-B21R | 34 | |
| 9 (15) | M2.6 Long | DE-C8-J9-F41R | 18.9 | DE-C8-J9-B41R | 19.4 |
| 15 (26) | DA-C8-J10-F41R | 21.4 | DA-C8-J10-B41R | 23 | |
| 25 (44) | DB-C8-J10-F41R | 28 | DB-C8-J10-B41R | 28.8 | |
| 37 (62) | DC-C8-J13-F41R | 33.2 | DC-C8-J13-B41R | 33.8 | |
| 50 (78) | DD-C8-J13-F41R | 34.8 | DD-C8-J13-B41R | 34.9 | |
| 9 (15) | #4-40 Long | DE-C8-J9-F51R | 15.5 | DE-C8-J9-B51R | 19.6 |
| 15 (26) | DA-C8-J10-F51R | 21.7 | DA-C8-J10-B51R | 19.7 | |
| 25 (44) | DB-C8-J10-F51R | 28.1 | DB-C8-J10-B51R | 28.8 | |
| 37 (62) | DC-C8-J13-F51R | 24.1 | DC-C8-J13-B51R | 37 | |
| 50 (78) | DD-C8-J13-F51R | 35.2 | DD-C8-J13-B51R | 34.7 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |