Convertible Male/Female D-Sub Connector
Brand :
MISUMI
Caution
Product Description
[Features]An adapter that converts the male/female D-sub connector or extends the harness. Existing wiring can be effectively used for extension.
● Adapters for converting or extending D-sub connector male and female parts.
| Rated Current | Withstand Voltage (1 minute) | Insulation Resistance (500V DC) | Operating Temperature |
| 3A | 1000 VACr.m.s | 1000 MΩ or more | -55°C – +105°C |
· In terms of internal wire connections, all wires are straight-wired with the same contact number connections.
· Screws may become loose or undone during transport, but this will not damage the product.
Specifications
* H15 is high-density 15-core
| Model Number | Number of Cores * | Connector Body Form | Screw Type | Conversion Details | Weight g |
| DGC-9PP-M | 9 | Male / Male | M2.6 | Convert female (socket) to male (pin) | 10.0 |
| DGC-15PP-M | 15 | 12.0 | |||
| DGC-25PP-M | 25 | 15.0 | |||
| DGC-37PP-M | 37 | 19.0 | |||
| HDGC-15PP-M | H15 | 10.0 | |||
| DGC-9SS-M | 9 | Female / Female | Convert male (pin) to female socket | 11.0 | |
| DGC-15SS-M | 15 | 13.5 | |||
| DGC-25SS-M | 25 | 18.0 | |||
| DGC-37SS-M | 37 | 23.5 | |||
| HDGC-15SS-M | H15 | 10.0 | |||
| DGC-9PP | 9 | Male / Male | # 4-40 | Convert female (socket) to male (pin) | 10.0 |
| DGC-15PP | 15 | 12.0 | |||
| DGC-25PP | 25 | 15.0 | |||
| DGC-37PP | 37 | 19.0 | |||
| HDGC-15PP | H15 | 10.0 | |||
| DGC-9SS | 9 | Female / Female | Convert male (pin) to female socket | 11.0 | |
| DGC-15SS | 15 | 13.5 | |||
| DGC-25SS | 25 | 18.0 | |||
| DGC-37SS | 37 | 23.5 | |||
| HDGC-15SS | H15 | 10.0 | |||
| DGC-9PS | 9 | Male / Female | # 4-40 | Height adjustment of male (pin) or female (socket) | 10.5 |
| DGC-15PS | 15 | 17.0 | |||
| DGC-25PS | 25 | 16.5 | |||
| HDGC-15PS | H15 | 9.5 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |