• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

MWI Series (Pitch between terminals 7 mm)

MWI Series (Pitch between terminals 7 mm)
  • Volume Discount

● As a relay connector terminal block for AC servo motors, etc.

  • c-UL
  • CE-Compliant
  • For Signal
  • AC Servo
  • 125 V

● Can be mounted on DIN rail with a single action.

· 50 core is a 2 guide key type.
· Check equipment side specifications for connector array before ordering.

Part Number

Configured Part Number is shown.


Specification Table

ModelNumber of Poles

Overview of Specifications

Conforming connector
ModelNumber of PolesNumber of Guide KeysMounting Connector (Hirose Electric) MaleRecommended harnessWeight of Connector Terminal Block (g)
MWI-MIL50-TB50502HIF3BA-50PA-2.54DSA71HIFS Series208
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Vibration-ResistantDouble amplitude 1.5 mm / 1 hour (10 to 55 Hz/min)
Impact-Resistant10 G Equivalent
Insulation Resistance100 MΩ or more (500 V DC megger)
Ambient Temperature (Operation)−20 to +80°C
Ambient Temperature (Storage)−20 to +80°C
Relative Temperature45 to 85%
Pitch Between Terminals7 mm
Terminal Block ScrewM3
Tightening Torque0.6 to 0.9 N·m
Conforming Wire1.25 mm2 Max
(2 mm2 Max: When specified crimp terminal is used)
Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass, tin plating
CaseUL94V-0 (Polycarbonate)
Part Number
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more


  1. 1

Basic Information

Connector MIL connector Terminal Block Screw M3 Number of connector cores(Pole) 50
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment Servomotor
Supported equipment manufacturer Yasukawa Electric / Panasonic Electronic Works Representative Standard CE / CUL Dimension vertical(mm) 49
Dimension width(mm) 185 Dimension depth(mm) 45 Supported crimp terminal Y Terminal / Round Terminal
Number of terminal block electrodes(Pole) 50 Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWI-MIL50-TB50 in the MWI Series (Pitch between terminals 7 mm) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)