• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

MWI Series (Pitch between terminals 7 mm)

MWI Series (Pitch between terminals 7 mm)
  • Volume Discount

FCN connector-equipped terminal block with 7 mm pitch between terminals

  • For Signal
  • Sensor
  • PLC
  • 125 V

● Lower level wiring can be performed without upper level wiring causing obstruction
● Fujitsu FCN series 40 core connector equipped
● Supports both DIN rail mounting and screw mounting

Part Number

Configured Part Number is shown.


Specification Table

ModelNumber of Poles

Overview of Specifications

Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass, tin plating
CaseUL94V-0 (Polycarbonate)
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Vibration-ResistantDouble amplitude 1.5 mm / 1 hour (10 to 55 Hz/min)
Impact-Resistant10 G Equivalent
Insulation Resistance100 MΩ or more (500 V DC megger)
Ambient Temperature (Operation)−20 to +80°C
Ambient Temperature (Storage)−20 to +80°C
Relative Temperature45 to 85%
Pitch Between Terminals7 mm
Terminal Block ScrewM3
Tightening Torque0.6 to 0.9 N·m
Conforming Wire1.25 mm2 Max
(2 mm2 Max: When specified crimp terminal is used)
Part Number
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more


  1. 1

Basic Information

Connector FCN connector Terminal Block Screw M3 Number of connector cores(Pole) 40
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment PLC
Dimension vertical(mm) 41.5 Dimension width(mm) 150 Dimension depth(mm) 42.5
Supported crimp terminal Y Terminal Number of terminal block electrodes(Pole) 40 Connector Polarity (Mounted Connector) Female
Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWI-FCN40-HTB40 in the MWI Series (Pitch between terminals 7 mm) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)