Generic EMI Countermeasures Connectors

Brand :

MISUMI

Caution

Product Description

A series that uses Centronics connectors (pressure contact type) made by Daiichi Denshi Kogyo (DDK) and cables made by Misumi. The connection is a spring lock. An EMI countermeasure series that uses a die-cast hood. Lineup of 14, 24, 36 and 50 cores. Can be used to connect various control devices, printers, etc.
[Features]
·Connector hood: DDK Centronics Connector IDC Type
·Cable: Double-shielded, thin flexible, oil-resistant, and a wide variety of cable types (4 types) to choose from. The cable is twisted pair.
·mating: Spring lock type
·Overall Length: The length can be specified in 0.1 m increments from a minimum of 0.2 m to a maximum of 50 m.
·Free combination with connectors on both ends, cut off on one side, Y terminal on one side, etc.

● Cables that feature the Centronics connector that can be used for connection of various control devices and printers, etc.
EMI countermeasure model cables that feature a shield twisted pair cable for the shield and die-cast hood for the connector.

· Small diameter cables support 30V.
· It cannot be connected with the screw lock model.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· The shield is connected to the hood.
· The combination of the Centronics connector and other connectors' combination cables can be handled with the "Web Design Harness Plus"

Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

Specifications

Generic EMI Countermeasures Connectors:Related Image

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


ND8 EMI Countermeasure Type Pressure Welding Type Connector Spring Lock Type DDK	P (Male)			14	0.2 ~ 50 Can be specified by 0.1m increments
				24
				36
				50
	PP (Male / Male)			14
				24
				36
				50
	PY (Male / Y Terminal) With Pin No. Insertion Mark Tube			14
				24
				36
				50
	PT (Male / Loose Wires) With Pin No. Insertion Mark Tube			14
				24
				36
				50

* - is not available.

Material / Finish

Soldering Type, Gender Changer

Item	Materials	Finish
Insulator (RC Type)	Glass-Filled Polybutylene Terephthalate	UL94V-0, Blue
Insulator (Type 57, Angle Type)	DAP Resin	UL94V-0, Blue
Contact	Copper Alloy	Nickel Base Gold Plating
Shell	Steel	Nickel-plated
Hood (Angle Type Only)	Aluminum Alloy	Rustproofing Treatment
Spring Latch	Stainless Steel	-

Soldering Type

Pressure Welding Type

Item	Materials	Finish
Insulator	PC Resin	UL94V-0, Blue
Contact	Copper Alloy	Nickel Base Gold Plating
Shell (57FE-40 only)	Brass	Nickel-plated
Strain Relief	PC Resin	UL94V-0, Blue
Earth Plate (57FE-30 only)	Brass	Nickel-plated
Spring Latch (57FE-40 only)	Stainless Steel	-
Metal Hood (57FE-30 only)	Aluminum Alloy	Rustproofing Treatment

Pressure Welding Type

* 57F series is made up of 4 components: insulator, contact, strain relief, and pressure welding cover.

Compatible Wire

Connector Type	Single Wire Conductor Diameter	Stranded Wire Conductor Cross-sectional Area	AWG Size
Soldering Type	0.65 mm or less	0.2 mm2 or less	Stranded Wire AWG24 or less Single Wire AWG22 or less
Pressure Welding Type	-	-	AWG26 (Single Wire), AWG28 (Stranded Wire, Single Wire) or AWG30 (Single Wire) 1.27 mm Pitch Flat Cable

Electrical Properties

Item	Soldering Type	Pressure Welding Type
Rated Current	5 A or lower	1 A or lower
Rated Voltage	500 VAC or less	250 VAC or less
Contact Resistance	35 mΩ or less / 1 ADC	35 mΩ or less / 1 ADC
Insulation Resistance	1,000 MΩ or more / 500 VDC	1,000 MΩ or more / 500 VDC
Withstand Voltage	1,000 VAC / minute	500 VAC / minute
Operating Temperature Range	-55°C ~ +105°C	-55°C ~ +105°C

Mechanical Properties

Item	Characteristics	Conditions
Insertion and Extraction Force Per Single Pole	Insertion Force: 112 g or less, Extraction Force: 86 g or less	When the plug and socket are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole
Vibration Resistance	· No interruption to power supplies of 1 μs or more · No abnormalities such as damage etc. on the connector	In compliance with MIL-STD-202 test method condition 204 A, simple vibration with smaller amplitude, either the total amplitude of 1.52 mm from 10 Hz to 500 Hz or 10 G (gravity units) is applied to each for 3 hours in mutually perpendicular 3-axis direction.
Impact Resistance	No cracks in the connector or abnormalities such as loosening in breakable parts	Impact of 50 G with duration 11 msec is applied to the coupled connector in mutually perpendicular axis direction.
Insertion and Removal Durability	No mechanical damage	Perform insertion and removal 500 times at speeds not exceeding 500 times per 1 hour.

Environmental Properties

Item	Characteristics	Conditions
Temperature Resistance	There should be no physical damage or obstacle when inserting or removing the connector	Repeatedly expose to temperatures +85°C and -55°C for 30 minutes 5 times each. However, do not expose to room temperature for 5 minutes or more when moving from low temperature to high and from high temperature to low.
Humidity Resistance	· There should be no mechanical damages · Voltage Resistance 300 VAC 1 minute	Perform 96-hour humidity test with the connector detached in compliance with MIL-STD-202 test method 103 B.
Corrosion Resistance	There should be no significant corrosion or obstacle when inserting or removing the connector	After performing a 48-hour salt spray test with the connector attached in compliance with MIL-STD-202 test method condition 101 B, the connector is uncoupled, washed, and dried for 12 hours in a drying oven at 38°C.

Contact Arrangement Diagram

This diagram is a view of the socket (female) connector from the coupling.
The plug (male) will be reversed on the left and right.