Generic Connectors

Brand :

MISUMI

Caution

Product Description

A cable with a connector in the MR series that is widely used in factory automation equipment.
High quality products are provided with quick delivery.

● A cable that uses the MR Series connector widely used in FA equipment.

· Male and female cannot be connected.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· The shield holds the lead wire.
· Shipped with the MR-4+ mounted, which is a fitting for relay fixation.

Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

Specifications

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


AR Screws / With One-touch Lock Plastic Hood Honda Tsushin Kogyo Co., LTD.	P (Male)			8	0.2 ~ 50 Can be specified by 0.1m increments
				16
				20
				25
				34
				50
	S (Female)			8
				16
				20
				25
				34
				50
	PP (Male / Male)			8
				16
				20
				25
				34
				50
	SS (Female / Female)			8
				16
				20
				25
				34
				50
	PS (Male / Female)			8
				16
				20
				25
				34
				50

Specified Length (m)	~ 0.9	1 ~ 4	4.1 ~ 50
Tolerance	+20mm	+50mm	+ 3% of Specified Length

* The tolerance of the specified length is as described above.

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


AR With One-touch Lock Plastic Hood Honda Tsushin Kogyo Co., LTD.	ST (Female / Loose Wires) With Pin No. Insertion Mark Tube			8	0.2 ~ 50 Can be specified by 0.1 m increments
				16
				20
				25
				34
				50
	PT (Male / Loose Wires) With Pin No. Insertion Mark Tube			8
				16
				20
				25
				34
				50
	SY (Female / Y Terminal) With Pin No. Insertion Mark Tube			8
				16
				20
				25
				34
				50
	PY (Male / Y Terminal) With Pin No. Insertion Mark Tube			8
				16
				20
				25
				34
				50

Material / Finish

Item	Materials	Finish
Insulator	Diallyl Phthalate Resin	Blue
Male Contact	Brass	Silver Plating
Female Contact	Phosphor Bronze	Silver Plating
Hood	ABS Resin	Gray
Spring-lock	Stainless Steel	-
Fixing Bracket	Zinc Die-cast	Zinc Uni-chrome Plated

Connector x Hood Combination Table

Hood Connector		Straight	For Vertical and Horizontal Dual-use
MR- * L+	MR- * LW+	MR- * LK2+
Male	○	○	○
Female	○	○	○

Hood x Hood Combination Chart

Hood		Straight	For Vertical and Horizontal Dual-use	Straight Relay
Hood		MR- * L+	MR- * LW+	MR- * LK2+
Straight	MR- * L+	x	x	○
For Vertical and Horizontal Dual-use	MR- * LW+	x	x	○
Straight Relay	MR- * LK2+	○	○	x

・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.

Contact Arrangement ◆Male (Pin)

* Female (socket) would have the right and left reversed. (View from the connector cable connection side.)

Compatible Wire

	AWG	mm2
Size	28 ~ 24	0.08 ~ 0.2

(Please make sure that the finished OD of the cable is equal to or smaller than the cable clamp ID of the hood)

Electrical Properties

Item	Characteristics	Conditions
Rated Current	3 A or less	Allowable current of single contact after coupling
Rated Voltage	300 VAC or less	Allowable voltage within operating temperature range
Contact Resistance	5 mΩ or less	Measured at 1 ADC
Insulation Resistance	1,000 MΩ or more	Measured at 500 VDC
Withstand Voltage	1,000 VAC	No insulation breakdown after 1 min of application
Operating Temperature Range	-40°C ~ +105°C	-

Mechanical Properties

Item	Characteristics	Conditions
Extraction Force Per Single Core	Insertion Force: 300 g or less, Extraction Force: 50 g or more	0.6±0.01 measured with flat steel gauge
Vibration Resistance	No cracks or looseness after testing	Tested at 1.5 mm Amplitude, 10 Hz ~ 55 Hz Vibration Frequency, Acceleration Speed of 15 G
Impact Resistance	No abnormalities or cracks in any parts	Tested at Acceleration Speed of 50 G
Insertion and Removal Durability	Contact resistance is 10 mΩ /1 ADC	Measured after being inserted/extracted 1,000 times

Environmental Properties

Item	Characteristics	Conditions
Temperature Resistance	No abnormalities or cracks in any parts	Measured after being tested at -55°C ~ +85°C
Humidity Resistance	1,000 MΩ Insulation Resistance / 500 VDC, Withstand Voltage 1,000 VAC / min	Measured at 90 ~ 95% Humidity, 96 H Duration and 40°C Temperature
Corrosion Resistance	With no significant corrosion and 10 mΩ / 1 ADC or less contact resistance	Measured after being tested in 5% salt water for 48 hours