IEEE1284 half-pitch (MDR) cable with connector EMI countermeasure type

Brand :

MISUMI

Caution

Product Description

Most Versatile Half-Pitch Connector Harness

● A cable with IEEE1284 connector that supports various models of control equipment such as servo drivers.

· The shield is connected to the hood.
· The cable supports a 30V rating.

Wiring and Wire Color Page
>>Click here
*HU model >>Click here
HUC model >>Click here
HUJ model >>Click here
Component Page
>>Click here

Specifications

General Purpose EMI Countermeasure Cable:Related Image

Connector Type	Shape Specification Type	Outline Image Drawing (Unit: mm)	Cable Type	Number of Cores	Specified Length (m)


SHPT EMI Protection Plastic With Hood One-touch Lock SHPKZ EMI Protection With Die-Cast Hood One-touch Lock SHPF With Plastic Hood * 40-core, 68-core are unavailable One-touch Lock SHPFJS With Plastic Hood * 40-core, 68-core are unavailable Jack Screw Screw Lock Sumitomo 3M	H (Male)			14	0.2 ~ 50 (Can be specified by 0.1 m increments)
				20
				26
				36
				40
				50
				68
	HH (Male / Male)			14
				20
				26
				36
				40
				50
				68
	HY (Male / Y Terminal) With Pin No. Insertion Mark Tube			14
				20
				26
				36
				40
				50
				68
	HT (Male / Loose Wires) With Pin No. Insertion Mark Tube			14
				20
				26
				36
				40
				50	1 ~ 50 (Can be specified by 0.1 m increments)
				68
	HU (Male / Fusion) Misumi Original Connection HUC (Male / Fusion) Staggered Connection HUJ (Male / Fusion) Inline Connection			14
				20
				26
				36
				40
				50
				68
	HM34SB (Male / MIL Socket Connector 34-Core Female 2-Branches)			68

Specified Length (m)	~ 0.9	1 ~ 4	4.1 ~ 50
Tolerance	+20mm	+50mm	+ 3% of Specified Length

* The tolerance of the specified length is as described above.

Compatible Manufacturers and Series Names

Manufacturer Name	Series Name
AMP	CHAMP 50
Hirose Electric Co., Ltd.	DXM (Note)
Japan Aviation Electronics Industry, Ltd.	TX10
Honda Tsushin Kogyo Co., Ltd.	NPC
DDK Ltd.	DHA
Fujitsu Limited	240R Type
Yamaichi Electronics Co., Ltd.	NCS/NCP

(Note) Please note that these are not compatible with the DX Series by Hirose Electric Co., Ltd.

Contact Arrangement Diagram

Connector x Hood Combination Table

			EMI Countermeasure Plastic Hood One-touch Lock	EMI Countermeasure Metal Hood One-touch Lock	EMI Countermeasure Plastic Hood Screw Fastening	General-purpose Plastic Hood Screw Fastening	General-purpose Plastic Hood One-touch Lock
			103** -3210-00	103** -A200-00	103** -52S0-00S	103** -52A0-008	103** -52F0-008
Male	Pressure Welding Type Connector	101** -6000EL	○	○	○ (Except 68-core)	○ (Except 68-core)	○ (Except 68-core)
Female	Solder Type Connector	101** -3000PE	x	x	○	○	○
Female	Pressure Welding Type Panel Mount	102** -0200EL	x	x	x	x	x

○ = Combination available x = Combination unavailable

・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.

Compatible Wire

Type	AWG
Pressure Welding Type Male Connector	AWG28 stranded wires or 0.08 mm2 stranded wires (Coating OD 0.70 mm or less) and navy fixed type cables can be used. * Flat cables cannot be used. (Note)
Solder Type Male Connector	AWG24 ~ 30 or 0.2 mm2 ~ 0.05 mm2 (Flat cables cannot be used.)* Pay attention to the finished OD of the cables.
Pressure Welding Type Panel Mount (Female)	AWG28 or 0.08 mm2, 1.27 mm Pitch Flat Cables (Loose wires cannot be used.)*

Rating

Item	Specification	Conditions
Current	0.5 A or less	Allowable current between coupled contacts
Voltage	150 VAC / 200 VDC or less	Refers to the maximum DC or AC voltage (effective value) that can be continuously applied under the rated ambient temperature
Ambient Temperature	-55°C ~ +85°C	Refers to the temperature range that can be used continuously under maximum load conditions

Electrical Properties

Item	Characteristics	Conditions
Contact Resistance	Initial value of 35 mΩ or less For contact after mechanical testing or environmental testing increased resistance value must be 25 mΩ or less	Includes bulk resistance of contacts. 1.5 mA resistance measured current and 20 mV release voltage based on the voltage-drop testing method. (Based on combination with half pitch connectors by Sumitomo 3M)
Insulation Resistance	500 MΩ or more	Apply 500 VDC between the adjoining contacts and measure the resistance after 1 min.
Voltage Resistance	No arc dielectric breakdown	Apply 500 VAC between the adjoining contacts for 1 min. Leakage current is 1 mA at the time of measurement.

Mechanical Properties

Item	Characteristics	Conditions
Contact Retention Force	1 kg or more (Pressure welding type panel mount is 0.8 kg or more)	Measure the contact retention force when tension is applied at the speed of 5 mm / min between the connector body and the installed contact.
Insertion and Extraction Force Per Single Pole	・ Insertion Force: 150 g or less / Extraction Force: 40 g or more	The total insertion / removal force for plug / panel mount insertion / removal applied to a single pole is adopted as the single-pole insertion / removal force. (Based on combination with plugs by Sumitomo 3M) Insertion / Extraction speed is 5 mm / min.
Vibration Test	1) 1 μsec or less instantaneous disconnection 2) Meets electrical & mechanical properties	10 ~ 55 HZ, insertion & extraction for 1 min, 1.52 mm amplitude or 10 G in XYZ directions for 2 hours each
Impact Test	1) 1 μsec or less instantaneous disconnection 2) Meets electrical & mechanical properties	50 G, 11 msec XYZ directions, 3 times each (18 times total) MIL-STD-202E201A
Solvent Resistance	1) Indication is clear 2) Meets the electrical & mechanical properties	3 min of ultrasonic cleaning in Freon 1-1-1 Trichloroethane solvent MIL-STD-202E213B
Durability	1) Meets the electrical & mechanical properties However, initial values at insertion and extraction must be ±20%	50 times of insertion and extraction (Speed at 360 ~ 600 times / hr.) MIL-STD-202E215

Environmental Resistance Properties

Item	Test Conditions	Standards Compliance
Humidity Test	10 Cycles (-10°C ~ +65°C, 95% RH)	MIL-STD-202E106D
Salt Spray Test	35°C, 5% concentration, 48 hr.	MIL-STD-202E101D
Thermal Shock Test	5 Cycles of -55°C --> +25°C --> +85°C --> +25°C	MIL-STD-202E107D
Humidity Test (Regulated Temperature)	40°C, 95% RH, 96 hr.	MIL-STD-202E103D
High Temperature Life Test	85°C, 1,000 hr., rated current x 110% rated current	MIL-STD-202E108D
H2S Gas	Concentration 3±1 PPM, 40°C, 70 ~ 85% RH, 96 hr.	JEIDA-25-1974 (Except for Solder Plug)