NB01/CE01 Waterproof Angle Plug (Bayonet Lock)

Brand :

MISUMI

Caution

Product Description

[Features]This is a waterproof type angle plug. A bayonet lock method that can easily locks into place. Cable can be routed easily in tight spaces. An angle plug that can be connected to a panel-mount receptacle and inline adapter. [Applications]A semi-twisted bayonet lock with a special spring structure makes it easy to confirm secure mating. Since it has an IP67 class waterproof structure when mated, it is suitable for use in locations exposed to water or oil.

● Angled plugs that are connectable with the panel mount receptacle and the relay adapter.
● The special spring structure allows the secure fitting to be easily confirmed by a half twist of the bayonet lock.
● It has a waterproof fitting structure class IP67, which makes it suitable for use in places exposed to water or oil.

· The contact for crimp model (CE0108A) is sold separately.
· The cable outlet is not designed to hold the cable.
· Match with the waterproof cable clamp for use.
· Angle plugs cannot be fitted with one another.
· CE01 series are DDK products sold with Misumi model numbers.

Specifications

NB01/CE01 Waterproof Angle Plug (Bayonet Lock):Related Image

Wire Connection Type	Arrangement No.	Contact Shape	Cable Drawing Out Direction	Number of Cores	Shell Size	Contact Size


NB0108A Solder Connection CE0108A Crimp Connection	18-1	P Male (Pin) S Female (Socket)	DBAS (Angled)	10	18	#16
	18-11			5	18	#12
	20-15			7	20	#12
	20-29			17	20	#16
	22-14			19	22	#16
	22-22			4	22	#8
	22-23			8	22	#12
	24-10			7	24	#8
	24-28			24	24	#16
	28-21			37	28	#16
CE0108A Crimp Connection	18-19A			19	18	#20
	20-30A			30	20	#20
	24-52A			52	24	#20
	28-73A			73	28	#20

Protection Circuit Connection Structural Diagram

Each connector is equipped with 1 ground contact protection circuit with a conductive shell (earth terminal). When coupling, the earth terminal makes contact before the other contacts, and at the time of removal, the earth terminal is disconnected after the other contacts, so the unit circuits are protected reliably.

About Compatible Products

NB01 connectors, CE01 connectors, and JL05 connectors are compatible with each other.

Combination Method

Material / Finish

Item	Materials	Finish
Shell (Body)	Aluminum Alloy	Black Chromate Treatment
Insulator	Polyester Resin	UL94V-0, Gray
Contact	Copper Alloy	Silver Plating
O-ring	Nitrile Rubber	Black
Coupling Nut	Aluminum Alloy	Black Chromate Treatment
Earth Lug	Steel Alloy	Silver Plating
Rear Gasket for Flange	Chloroprene Rubber	Black

Electrical and Mechanical Properties, Compatible Wires

Item	Characteristics
Rated Current	Contact Size		#20	#16		#12		#8
Rated Current	Maximum Value per 1 Piece		5 A	13 A		23 A		46 A
Rated Voltage	Rating Classification		AC (r.m.s)			DC
	INST		200			250
	A		500			700
	D		900			1,250
Withstand Voltage	INST		1,000 VAC (r.m.s) 1 minute
	A		2,000 VAC (r.m.s) 1 minute
	D		2,800 VAC (r.m.s) 1 minute
Insulation Resistance	5,000 MΩ or more at 500 VDC
Contact Resistance	Contact Size		#20	#16		#12		#8
Contact Resistance	mΩ or less		8	4		2		0.6
Operating Temperature Range	-55°C ~ +125°C
Waterproofing	IP67 Equivalent
Humidity	Relative Humidity 95% or less
Service Life	500 Insertions and Removals
NB01 (Solder Type) Compatible Wires (Note 2)	Contact Size	#16			#12		#8
	Conductor Cross-sectional Area	0.75 mm2 or less			3.5 mm2 or less		8 mm2 or less
	AWG Size	18 or less			12 or less		8 or less

(Note 1) Rated voltage and voltage resistance are shown with rating classification symbols (INST, A; D). Refer as well to the table below.

Contact Arrangement Diagram

Number of Contacts	4	5	7	7	8
Arrangement No.	22-22	18-11	20-15	24-10	22-23
Contact Size	#8	#12	#12	#8	#12
Contact Arrangement (Note 1) (Note 2)
Rating Classification	A	A	A	A	D (4), A (Others)

Number of Contacts	10	17	19	19	24
Arrangement No.	18-1	20-29	18-19A	22-14	24-28
Contact Size	#16	#16	#20	#16	#16
Contact Arrangement (Note 1) (Note 2)
Rating Classification	A (3, 5, 6, 8), INST (Others)	A	INST	A	INST

Number of Contacts	30	37	52	73
Arrangement No.	20-30A	28-21	24-52A	28-73A
Contact Size	#20	#16	#20	#20
Contact Arrangement (Note 1) (Note 2)
Rating Classification	INST	A	INST	INST

(Note 1) View from the male (pin) connector coupling surface.
(Note 2) The ○ in the arrangement table shows the earth terminals (for protection of terminal connections).

Panel Cut Size Drawing

Compatible Shell Size	φA ±0.5	φB +0.2 -0	C ±0.13	Mounting Screws (Reference)		Rear Mounting Panel Thickness Limit
Compatible Shell Size	φA ±0.5	φB +0.2 -0	C ±0.13	Inch Screws	Metric Screws	Rear Mounting Panel Thickness Limit
18	30.2	3.3	26.97	#4-40	M3	3.0 or less
20	34.9	3.3	29.36	#4-40	M3
22	36.6	3.3	31.75	#4-40	M3
24	39.7	4.3	34.92	#6-32	M4
28	46.1	4.3	39.67	#6-32	M4