Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
HR10 Straight Plug (One-touch Lock)
Brand :
MISUMI
Caution
Product Description
Push-pull Lock Method Miniature HR10 Connector
● Connects to panel mount receptacles and relay models.
● One touch attachment/detachment by simply holding the outer ring and pulling.
· Straight plugs cannot be fitted with one another.
Specifications
| Model | Number of Cores | Type | Weight g |
| HR10A-7P-4P73 | 4 | Male (Pin) | 8.2 |
| HR10A-7P-6P73 | 6 | 8.2 | |
| HR10A-10P-10P73 | 10 | 15.8 | |
| HR10A-10P-12P73 | 12 | 15.8 | |
| HR10A-7P-4S73 | 4 | Female (Socket) | 7.8 |
| HR10A-7P-6S73 | 6 | 8.5 | |
| HR10A-10P-10S73 | 10 | 15.9 | |
| HR10A-10P-12S73 | 12 | 15.8 |
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Withstand Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
