Cable Tie Binding Tool (Soft Lever Model)

Cable Tie Binding Tool (Soft Lever Model)
  • Volume Discount

Lightweight lever and non-fatiguing binding tool. Products are suitable for long working hours


● This is a bundling tool that can be used for nylon binding bands with a width of 6 mm or less.
● It is cut after tightening the binding band.
● The lever is light. This tool reduces the load of the worker during long-term work.


· Caution is needed when tightening. If the bundle is too loose, wires may slip out from the bundle, and if it is too tight, the wire coating may be damaged.
· Bundling is optimal when the band can be rotated on the wires, but it holds and does not come off in the lateral direction.
· Depending on the quantity of your order, the delivery time may require an estimate.
· The appearance and specifications are subject to change without notice.

PDF

Part Number

Configured Part Number is shown.

SK-F303

Specifications

Cable Tie Binding Tool (Soft Lever Model):Related Image

Model NumberWeight
(g)
SK-F303306

More Information

Guideline Table for Tightening Strength
Strength ScaleLoop Tensile Strength (kgf)
14.9
27.7
39.2
410.0
511.4
611.8
713.0
814.4
* The loop tensile strength value is an average value.
Part Number
SK-F303
Part NumberVolume DiscountDays to Ship
Available 2 Day(s) or more

Loading...

  1. 1

Basic Information

Features Soft Lever Model Conforming zip tie For Width 6 mm or less

Please check the type/dimensions/specifications of the part SK-F303 in the Cable Tie Binding Tool (Soft Lever Model) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)