Pressure Welding Angle Model
Caution
Product Description
A series in which MIL angle drawers can be selected. The angle shape makes wiring easy even in tight spaces. Widely used for programmable controllers (PLC) and I/O cards. Printing on wire marker sleeve complies with the signal name of the corresponding device. (Only when machining discrete wire on one end)
[Features]
·connector: Misumi MIL IDC connector / Hirose Electric MIL IDC connector
·Cable: Double-shielded, thin flexible, oil-resistant, and a wide variety of cable types (4 types) to choose from. cable is twisted pair
·Overall Length: The length can be specified in 0.1 m increments from a minimum of 0.2 m to a maximum of 50 m. 0.5 to 5 m only for EE type
·Free combination with connectors on both ends, cut off on one side, Y terminal on one side, etc.
·A wide range of selections for the number of contacts (MIL connector female: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64, 50W, 60W, 64W/MIL connector male: 10, 16, 20, 26, 30, 34 , 40, 50, 60, 64, 50W, 60W, 64W)
● Angle shape is used for easy maneuvering in narrow areas.
● Wiring is easy thanks to cables with diameter thinness 35% that of conventional cables.
· Removal of CN1 is the opposite direction to the guide key.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· For SB models, the exposed core parts have been fused together for protection.
Wiring and Wire Color Page >>Click here.
Component Page >>Click here.
Specifications
| Specified Length (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
* The tolerance of the specified length is as described above.
