TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
Caution
Product Description
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-EM2B (Standard) / TSC-PEM2B (Sharp Edge)
| Outer Diameter D | Shank Diameter d | Shank Diameter d | Flute Length ℓ | Overall Length L | Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | - | 4 | 0.75 | 40 | 1 | ● |
| 1 | - | 4 | 1.5 | 40 | 1 | ● |
| 1.5 | - | 4 | 2.25 | 40 | 1 | ● |
| 2 | - | 4 | 3 | 40 | 1 | ● |
| 2 | 6 | 6 | 3 | 40 | 1 | ● |
| 2.5 | - | 4 | 3.75 | 40 | 1 | ● |
| 3 | - | 6 | 4.5 | 45 | 1 | ● |
| 3.01 ~ 3.49 | - | 6 | 5.25 | 45 | 1 | □ |
| 3.5 | - | 6 | 5.25 | 45 | 1 | ● |
| 3.51 ~ 3.99 | - | 6 | 6 | 45 | 1 | □ |
| 4 | - | 6 | 6 | 45 | 1 | ● |
| 4.01 ~ 4.49 | - | 6 | 6.75 | 45 | 1 | □ |
| 4.5 | - | 6 | 6.75 | 45 | 1 | ● |
| 4.51 ~ 4.99 | - | 6 | 7.5 | 45 | 1 | □ |
| 5 | - | 6 | 7.5 | 45 | 1 | ● |
| 5.01 ~ 5.49 | - |
6 |
8.25 |
45 | 1 | □ |
| 5.5 | - |
6 | 8.25 |
45 | 1 | ● |
| 5.51 ~ 5.99 | - |
6 | 9 |
45 | 1 | □ |
| 6 | - |
6 | 9 |
45 | 2 | ● |
| 7.51 ~ 7.99 | - |
8 | 12 |
60 | 1 | □ |
| 8 | - |
8 | 12 |
60 | 2 | ● |
| 9.51 ~ 9.99 | - |
10 | 15 |
70 | 1 | □ |
| 10 | - |
10 | 15 |
70 | 2 | ● |
| 11.51 ~ 11.99 | - |
12 | 18 |
75 | 1 | □ |
| 12 | - |
12 | 18 |
75 | 2 | ● |
| 14 | - |
12 | 21 |
75 | 3 | ● |
| 15.51 ~ 15.99 | - |
16 | 24 |
100 | 1 | □ |
| 16 | - |
16 | 24 |
100 | 2 | ● |
| 19.51 ~ 19.99 | - |
20 | 30 |
105 | 1 | □ |
| 20 | - |
20 | 30 |
105 | 2 | ● |
[ ! ]Blade diameters of manufactured products are designated in 0.01 mm increments
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The stubby flute length that is 1.5 times greater than the flute blade diameter is ideal for high-speed machining.