TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
Caution
Product Description
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length 4D type supports deep cavity milling
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-EM2L (Standard)
| Outer Diameter D | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 | 1 | □ |
| 5 |
20 |
60 |
6 | 1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 | 1 | □ |
| 5.5 |
22 |
60 |
6 | 1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 | 1 | □ |
| 6 |
24 |
60 |
6 | 2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 | 1 | □ |
| 8 |
32 |
100 |
8 | 2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 | 1 | □ |
| 10 |
40 |
100 |
10 | 2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 | 1 | □ |
| 12 |
48 |
100 |
12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
TSC-PEM2L (Sharp Edge)
| Outer Diameter D | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 | 1 | □ |
| 5 |
20 |
60 |
6 | 1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 | 1 | □ |
| 5.5 |
22 |
60 |
6 | 1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 | 1 | □ |
| 6 |
24 |
60 |
6 | 2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 | 1 | □ |
| 8 |
32 |
100 |
8 | 2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 | 1 | □ |
| 10 |
40 |
100 |
10 | 2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 | 1 | □ |
| 12 |
48 |
100 |
12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.