TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
Caution
Product Description
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
| Model Number | Shank Diameter d | Flute Length ℓ | Overall Length L | Figure | ||
| Outer Diameter D | Shank Diameter d | |||||
| TSC-EM4S (Standard) TSC-PEM4S (Sharp Edge) | 1 | — | 4 | 2 | 40 | 1 |
| 1.5 | — | 4 | 3 | 40 | 1 | |
| 2 | — | 4 | 4 | 40 | 1 | |
| 2 | 6 | 6 | 4 | 45 | 1 | |
| 2.5 | — | 4 | 5 | 40 | 1 | |
| 3 | — | 6 | 6 | 45 | 1 | |
| 3.5 | — | 6 | 7 | 45 | 1 | |
| 4 | — | 6 | 8 | 45 | 1 | |
| 4.5 | — | 6 | 9 | 45 | 1 | |
| 5 | — | 6 | 10 | 45 | 1 | |
| 5.5 | — | 6 | 11 | 45 | 2 | |
| 6 | — | 6 | 12 | 45 | 1 | |
| 6.5 | — | 8 | 13 | 50 | 1 | |
| 7 | — | 8 | 14 | 55 | 1 | |
| 7.5 | — | 8 | 15 | 55 | 1 | |
| 8 | — | 8 | 16 | 55 | 2 | |
| 8.5 | — | 10 | 17 | 60 | 1 | |
| 9 | — | 10 | 18 | 65 | 1 | |
| 9.5 | — | 10 | 19 | 65 | 1 | |
| 10 | — | 10 | 20 | 65 | 2 | |
| 12 | — | 12 | 24 | 75 | 2 | |
| 14 | — | 12 | 28 | 75 | 3 | |
| 15 | — | 16 | 30 | 80 | 1 | |
| 16 | — | 16 | 32 | 105 | 2 | |
| 18 | — | 16 | 36 | 105 | 3 | |
| 20 | — | 20 | 40 | 110 | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.