TSC series carbide square end mill, 4-flute / 3.5D Flute Length model
Caution
Product Description
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The flute length is 3.5 times the cutting diameter between the regular flute and the long flute
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
| Model Number | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | |
| Outer Diameter D | |||||
| TSC-EM4RL (Standard) TSC-PEM4RL (Sharp Edge) | 1 | 3.5 | 45 | 6 | 1 |
| 1.5 | 5.25 | 45 | 6 | 1 | |
| 2 | 7 | 45 | 6 | 1 | |
| 3 | 10.5 | 45 | 6 | 1 | |
| 4 | 14 | 50 | 6 | 1 | |
| 5 | 17.5 | 55 | 6 | 1 | |
| 6 | 21 | 60 | 6 | 2 | |
| 8 | 28 | 70 | 8 | 2 | |
| 10 | 35 | 80 | 10 | 2 | |
| 12 | 42 | 95 | 12 | 2 | |
| 16 | 56 |
120 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The flute length is between that of regular flutes and long flutes, with a 3.5-times larger flute diameter.