TSC series carbide ball end mill, 3-flute / short model
Caution
Product Description
[Features]
·3-flute shape is resistant to chattering and enables high feed
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
| Model Number | Flute Length ℓ | Outer Diameter D | Overall Length L | Shank Diameter d | Figure | |
| Tip R | ||||||
| TSC-BEM3S | 0.5 | 2 | 1 | 50 | 6 | 1 |
| 0.75 | 3 | 1.5 | 50 | 6 | 1 | |
| 1 | 3 | 2 | 50 | 6 | 1 | |
| 1.5 | 4 | 3 | 50 | 6 | 1 | |
| 2 | 6 | 4 | 50 | 6 | 1 | |
| 2.5 | 8 | 5 | 50 | 6 | 1 | |
| 3 | 10 | 6 | 60 | 6 | 2 | |
| 4 | 13 | 8 | 60 | 8 | 2 | |
| 5 | 15 | 10 | 80 | 10 | 2 | |
| 6 | 15 | 12 | 80 | 12 | 2 | |
| 8 | 20 | 16 | 150 | 16 | 2 | |
| 10 | 25 | 20 | 150 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Adopts a 3-flute shape to be strong against chatter and is capable of handling high feed rates.
● Delivers a finish with a very good working surface roughness after machining.
[ ! ]The following additional processing services are available for the products on this page.