TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short
Caution
Product Description
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-MCR-LS-HFEM3S (3 Flutes)
| Outer Diameter D | Shoulder Radius R1 | Base Radius R2 | Approximate R-Value | Flute Length ℓ | Under Neck Diameter d1 | Length Under Neck ℓ1 | Overall Length L | Shank Diameter d | Figure |
| 4 | 0.5 | 4 | 0.813 | 8 | 3.8 | 35 | 80 | 6 | 1 |
| 6 | 0.5 | 9 | 1.219 | 10 | 5.7 | 70 | 120 | 6 | 1 |
| 8 | 1 | 12 | 1.625 | 16 | 7.6 | 85 | 135 | 8 | 2 |
| 10 | 1.5 | 15 | 2.031 | 20 | 9.5 | 100 | 150 | 10 | 2 |
| 12 | 1.5 | 18 | 2.438 | 24 | 11.5 | 108 | 160 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding. 