TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
Caution
Product Description
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time
Specifications
| Model Number | Flute Length ℓ | Under Neck Diameter d1 | Length Under Neck ℓ1 | Overall Length L | Shank Diameter d | Figure | |||||||
| Outer Diameter D | Radius R (Selection) | ||||||||||||
| TSC-CR-HFEM4N | 3 | 0.75 | 1.2 | 2.7 | 7.5 | 60 | 6 | 1 | |||||
| 4 | 1 | 1.6 | 3.6 | 10 | 70 | 6 | 1 | ||||||
| 5 | 1.2 | 2 | 4.5 | 12 | 80 | 6 | 1 | ||||||
| 6 | 1 | 1.5 | 2.5 | 5.4 | 12 | 90 | 6 | 2 | |||||
| 8 | 1 | 2 | 3.5 | 7.2 | 16 | 100 | 8 | 2 | |||||
| 10 | 1 | 2 | 3 | 4 | 9 | 20 | 100 | 10 | 2 | ||||
| 12 | 1 | 2 | 3 | 5 | 11 | 24 | 110 | 12 | 2 | ||||
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a negatively sharpened radius and non-twisted short blade length to realize a high rigidity and suppress chatter, even in pocket corners.
● Includes a back-taper that enables corners to be machined without the shoulder of the peripheral blade striking side surfaces.
● Just the one bit can be used for medium-finishing through to finishing with bottom surface machining, achieving a reduction in processing time.