TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
Caution
Product Description
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-CR-LS-HEM4S
| Outer Diameter D | Radius R | Flute Length ℓ | Under Neck Diameter d1 | Length Under Neck ℓ1 | Overall Length L | Shank Diameter d | Figure | |||||
| 3 | 0.2 | 0.5 | 4.5 | 2.9 | 10 | 80 | 6 | 1 | ||||
| 4 | 0.2 | 0.5 | 6 | 3.8 | 15 | 80 | 6 | 1 | ||||
| 6 | 0.3 | 0.5 | 9 | 5.8 | 18 | 120 | 6 | 2 | ||||
| 7 | 0.5 | 1 | 9 | - | - | 120 | 6 | 3 | ||||
| 9 | 0.5 | 1 | 1.5 | 13 | - | - | 135 | 8 | 3 | |||
| 11 | 0.5 | 1 | 1.5 | 18 | - | - | 160 | 10 | 3 | |||
| 13 | 1 | 1.5 | 2 | 20 | - | - | 160 | 12 | 3 | |||
| 17 | 1 | 2 | 25 | - | - | 180 | 16 | 3 | ||||
| 22 | 1 | 2 | 30 | - | - | 200 | 20 | 3 | ||||
For Cutting Conditions, Refer to >>Click here.
More Information
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● As the cutting chip discharge rate is high, the feed speed is also increased to 2 times greater than that of standard end mills.
● The long shank model is ideal for machining deep grooves.
● Shanks of Ø 7 or more are thinner than the blade diameter, preventing interference.