TSC series carbide radius end mill, 4-flute / regular model
Caution
Product Description
[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-CR-EM4R
| Outer Diameter D | Radius R Selection (Manufactured products designated in 0.1 mm increment) | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | ● Stocked Product □ Manufactured Product |
| 1 | 0.2 | 3 | 45 | 4 | 1 | ● |
| 2 | 0.3 0.5 | 6 | 45 | 4 | 1 | ● |
| 3 | 0.2 0.3 0.5 | 9 | 45 | 6 | 1 | ● |
| 0.1 ~ 0.7 | □ | |||||
| 3.5 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 | □ |
| 4 | 0.3 0.5 | 12 | 50 | 6 | 1 | ● |
| 0.1 ~ 1.0 | □ | |||||
| 4.5 | 0.1 ~ 1.0 | 13.5 | 50 | 6 | 1 | □ |
| 5 | 0.3 0.5 | 15 | 55 | 6 | 1 | ● |
| 0.1 ~ 1.0 | □ | |||||
| 5.5 | 0.1 ~ 1.0 | 16.5 | 55 | 6 | 1 | □ |
| 6 | 0.3 0.5 1 | 18 | 60 | 6 | 2 | ● |
| 0.1 ~ 1.2 | □ | |||||
| 8 | 0.5 1 1.5 | 24 | 70 | 8 | 2 | ● |
| 0.1 ~ 1.4 | □ | |||||
| 10 | 0.5 1 1.5 2 3 | 30 | 80 | 10 | 2 | ● |
| 0.1 ~ 2.9 | □ | |||||
| 12 | 1 1.5 2 3 | 36 | 85 | 12 | 2 | ● |
| 0.1 ~ 2.9 | □ |
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 4-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.