TSC series carbide long neck radius end mill, 2-flute, long neck model
Brand :
MISUMI
Caution
Product Description
Long neck radius that can be used as a ball and allows a large pick feed
Specifications
Model Number
TSC-CR-PEM2LB (Stocked Product)
| Outer Diameter D | Length Under Neck ℓ1 (Manufactured products designated in 1 mm increment) | Radius R | Flute Length ℓ | Under Neck Diameter d1 | Overall Length L | Shank Diameter d | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | ||||||||
| 0.2 |
1
|
0.05
|
0.16
|
0.18
|
50
|
4
|
1.05
|
1.10
|
1.22
|
1.37
| 1 |
| 0.3 |
1
|
0.05
|
0.24
|
0.28
|
50
|
4
|
1.05
|
1.10
|
1.22
|
1.37
| 1 |
|
2
|
2.09
|
2.20
|
2.44
|
2.75
| |||||||
| 0.4 |
2
|
0.05 0.1
|
0.32
|
0.37
|
50
|
4
|
2.09
|
2.20
|
2.44
|
2.75
| 1 |
|
3
|
3.14
|
3.30
|
3.66
|
4.12
| |||||||
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| |||||||
| 0.5 |
2
|
0.05 0.1
|
0.4
|
0.46
|
50
|
4
|
2.09
|
2.20
|
2.44
|
2.75
| 1 |
|
3
|
3.14
|
3.30
|
3.66
|
4.12
| |||||||
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| |||||||
|
5
|
5.24
|
5.49
|
6.10
|
6.87
| |||||||
| 0.6 |
2
|
0.05 0.1
|
0.48
|
0.56
|
50
|
4
|
2.09
|
2.20
|
2.44
|
2.75
| 1 |
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| |||||||
|
6
|
6.28
|
6.59
|
7.32
|
8.24
| |||||||
| 0.7 |
4
|
0.05 0.1
|
0.56
|
0.66
|
50
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| 1 |
|
6
|
6.28
|
6.59
|
7.32
|
8.24
| |||||||
| 0.8 |
4
|
0.05 0.1 0.2
|
0.64
|
0.76
|
50
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| 1 |
|
6
|
6.28
|
6.59
|
7.32
|
8.24
| |||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
| |||||||
| 0.9 |
4
|
0.1
|
0.72
|
0.85
|
50
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| 1 |
|
8
|
8.38
|
8.79
|
9.76
|
10.98
| |||||||
| 1 |
3
|
0.05
|
0.8
|
0.95
|
50
|
4
|
3.14
|
3.30
|
3.66
|
4.12
| 1 |
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| |||||||
|
5
|
5.24
|
5.49
|
6.10
|
6.87
| |||||||
|
6
|
6.28
|
6.59
|
7.32
|
8.24
| |||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
| |||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
3
|
0.1 0.2 0.3
|
3.14
|
3.30
|
3.66
|
4.12
| ||||||
|
4
|
4.19
|
4.40
|
4.88
|
5.49
| |||||||
|
5
|
5.24
|
5.49
|
6.10
|
6.87
| |||||||
|
6
|
6.28
|
6.59
|
7.32
|
8.24
| |||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
| |||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
| |||||||
| 1.2 |
5
|
0.1 0.2 0.3
|
0.96
|
1.15
|
50
|
4
|
5.24
|
5.49
|
6.10
|
6.87
| 1 |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
15
|
15.71
|
16.48
|
18.31
|
20.60
| |||||||
| 1.5 |
6
|
0.1
|
1.2
|
1.45
|
50
|
4
|
6.28
|
6.59
|
7.32
|
8.24
| 1 |
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
| |||||||
|
6
|
0.2 0.3
|
6.28
|
6.59
|
7.32
|
8.24
| ||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
| |||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
| |||||||
|
6
|
0.5
|
6.28
|
6.59
|
7.32
|
8.24
| ||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
| |||||||
| 2 |
8
|
0.1
|
1.6
|
1.95
|
50
|
4
|
8.38
|
8.79
|
9.76
|
10.98
| 1 |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
| |||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
| ||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
| |||||||
|
8
|
0.2 0.3 0.5
|
50
|
8.38
|
8.79
|
9.76
|
10.98
| |||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
| |||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
| |||||||
|
14
|
14.66
|
15.39
|
17.09
|
19.22
| |||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
| |||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
| ||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
| |||||||
| 2.5 |
15
|
0.1 0.2 0.3 0.5
|
2
|
2.45
|
70
|
4
|
15.71
|
16.48
|
18.31
|
Without Interference
| 1 |
|
20
|
20.94
|
21.98
|
Without Interference
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
Without Interference
|
Without Interference
| |||||||
| 3 |
16
|
0.1
|
2.4
|
2.9
|
70
|
6
|
16.75
|
17.58
|
19.53
|
21.97
| 1 |
|
20
|
20.94
|
21.98
|
24.41
|
27.46
| |||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
| |||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
| ||||||
|
16
|
0.2
|
70
|
16.75
|
17.58
|
19.53
|
21.97
| |||||
|
20
|
20.94
|
21.98
|
24.41
|
27.46
| |||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
| |||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
| ||||||
|
16
|
0.3
|
2.4
|
2.9
|
70
|
6
|
16.75
|
17.58
|
19.53
|
21.97
| 1 | |
|
20
|
20.94
|
21.98
|
24.41
|
27.46
| |||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
| |||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
| ||||||
|
16
|
0.5
|
70
|
16.75
|
17.58
|
19.53
|
21.97
| |||||
|
20
|
20.94
|
21.98
|
24.41
|
27.46
| |||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
| |||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
| ||||||
|
16
|
1
|
70
|
16.75
|
17.58
|
19.53
|
21.97
| |||||
|
20
|
20.94
|
21.98
|
24.41
|
27.46
| |||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
| |||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
| ||||||
|
4
|
16
|
0.1 0.2 0.3 0.5 1
|
3.2
|
3.8
|
70
|
6
|
16.75
|
17.58
|
19.53
|
Without Interference
| 1 |
|
20
|
20.94
|
21.98
|
24.41
|
Without Interference
| |||||||
|
30
|
31.41
|
32.97
|
Without Interference
|
Without Interference
| |||||||
|
5
|
20
|
0.1 0.2 0.3 0.5 1
|
4
|
4.8
|
70
|
6
|
20.94
|
21.98
|
Without Interference
|
Without Interference
| 1 |
|
30
|
31.41
|
Without Interference
|
Without Interference
|
Without Interference
| |||||||
|
6
|
25
|
0.1 0.2 0.3 0.5 1
|
4.8
|
5.8
|
70
|
6
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
| 2 |
|
40
|
100
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
| ||||||
Model Number
LN-TSC-CR-EM2S (Manufactured Product)
| Outer Diameter D | Radius R | Length Under Neck ℓ1 1 mm Increment Designation | Flute Length ℓ | Under Neck Diameter d1 | Overall Length L | Shank Diameter d | Figure |
| 1.5 | 0.10.20.3 | 8 ~ 20 | 3 | 1.45 | 40 | 4 | 3 |
| 2 | 0.10.20.30.5 | 9 ~ 21 | 4 | 1.95 | 40 | 4 | 3 |
| 3 | 0.10.20.30.5 | 11 ~ 21 | 6 | 2.9 | 45 | 6 | 3 |
| 4 | 0.20.30.51 | 13 ~ 23 | 8 | 3.8 | 45 | 6 | 3 |
| 5 | 0.20.30.51 | 17 ~ 25 | 12 | 4.8 | 45 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "length under neck" and "radius" is the opposite from that of stocked products.
For Cutting Conditions, Refer to >>Click here.
More Information
● It adopts a short flute length and back-tapered peripheral cutting edge for suppressing chatter.
● Radius (CR) accuracy is of high quality at ±5 μm (compared to our other products), allowing for high-precision deep groove machining to be achieved.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.