TS coated carbide chamfering end mill, 3-flute / short model
Caution
Product Description
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Specifications
| Model Number | Beveling Angle θ | Flute Length ℓ | Tip Core Thickness D1 | Overall Length L | Shank Diameter d | |
| Outer Diameter D | ||||||
| TSC-MEM3S | 3 | 90° | 6 | 0.3 | 50 | 3 |
| 4 | 90° | 8 | 0.4 | 50 | 4 | |
| 6 | 90° | 12 | 0.6 | 50 | 6 | |
| 8 | 90° | 16 | 0.8 | 55 | 8 | |
| 10 | 90° | 20 | 1.0 | 65 | 10 | |
| 12 | 90° | 24 | 1.2 | 75 | 12 |
For Cutting Conditions, Refer to >>Click here.
More Information
● Ideal for chamfering (the tip does not have a cutting edge so it cannot be used for V-grooving).
● It has a peripheral blade that allows for inclined, contour and helical cutting.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● The 3-flute blade shape increases the feed by 1.5 times compared to the 2-flute model.
● The peripheral blade has twisting that allows machining as per the figure above.
● Can also be used as a deburring tool.