Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
Caution
Product Description
2 types that are recommended in the standing-wall machining of aluminum
Specifications
| Model Number | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | |
| Outer Diameter D | |||||
| SEC-LS-ALHEM3B | 5 | 9 | 80 | 4 | 1 |
| 6 | 9 | 80 | 4 | 1 | |
| 8 | 12 | 100 | 6 | 1 | |
| 10 | 15 | 130 | 8 | 1 | |
| 12 | 18 | 150 | 10 | 1 | |
| 14 | 21 | 160 | 12 | 1 | |
| 18 | 27 | 180 | 16 | 1 | |
| 22 | 33 | 200 | 20 | 1 |
For Cutting Conditions, Refer to >>Click here.
More Information
● Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The shank relief also makes it suitable in cases where tool interference may be an issue.
● The corners of the blade tip are slightly rounded to prevent chipping when cutting.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
● It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)