Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model
Brand :
MISUMI
Caution
Product Description
DLC coated long neck square with both sharpness and durability
Specifications
Model Number
DLC-ALHEM2LB (Stocked Product)
| Outer Diameter D | Length Under Neck ℓ1 | Flute Length ℓ | Under Neck Diameter d1 | Overall Length L | Shank Diameter d | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||
| 0.5 | 4 | 1 | 0.46 | 50 | 4 | 4.16 | 4.33 | 4.72 | 5.19 | 1 |
| 8 | 8.32 | 8.66 | 9.46 | 10.52 | ||||||
| 1 | 6 | 2 | 0.95 | 50 | 4 | 6.24 | 6.49 | 7.1 | 7.89 | 1 |
| 8 | 8.32 | 8.66 | 9.46 | 10.52 | ||||||
| 12 | 12.48 | 12.99 | 14.2 | 15.78 | ||||||
| 1.5 | 8 | 3 | 1.45 | 50 | 4 | 8.32 | 8.66 | 9.46 | 10.52 | 1 |
| 10 | 10.4 | 10.83 | 11.83 | 13.15 | ||||||
| 12 | 12.48 | 12.99 | 14.2 | 15.78 | ||||||
| 16 | 16.65 | 17.33 | 18.93 | 21.04 | ||||||
| 2 | 6 | 4 | 1.95 | 50 | 4 | 6.24 | 6.49 | 7.1 | 7.89 | 1 |
| 8 | 8.32 | 8.66 | 9.46 | 10.52 | ||||||
| 10 | 10.4 | 10.83 | 11.83 | 13.15 | ||||||
| 12 | 12.48 | 12.99 | 14.2 | 15.78 | ||||||
| 16 | 16.65 | 17.33 | 18.93 | 21.04 | ||||||
| 20 | 70 | 20.81 | 21.66 | 23.67 | 26.3 | |||||
| 25 | 26.02 | 27.08 | 29.59 | 32.87 | ||||||
| 30 | 31.22 | 32.49 | 35.51 | 39.45 | ||||||
| 2.5 | 8 | 5 | 2.4 | 50 | 4 | 8.32 | 8.66 | 9.46 | 10.52 | 1 |
| 12 | 12.48 | 12.99 | 14.2 | 15.78 | ||||||
| 16 | 16.65 | 17.33 | 18.93 | 21.04 | ||||||
| 3 | 12 | 6 | 2.9 | 70 | 6 | 12.48 | 12.99 | 14.2 | 15.78 | 1 |
| 16 | 16.65 | 17.33 | 18.93 | 21.04 | ||||||
| 20 | 20.81 | 21.66 | 23.67 | 26.3 | ||||||
| 25 | 26.02 | 27.08 | 29.59 | 32.87 | ||||||
| 30 | 31.22 | 32.49 | 35.51 | 39.45 | ||||||
| 4 | 16 | 8 | 3.8 | 70 | 6 | 16.65 | 17.33 | 18.93 | 21.04 | 1 |
| 20 | 20.81 | 21.66 | 23.67 | 26.3 | ||||||
| 30 | 31.22 | 32.49 | Without Interference | Without Interference | ||||||
| 40 | 110 | 41.63 | 43.32 | Without Interference | Without Interference | |||||
| 5 | 16 | 10 | 4.8 | 70 | 6 | 16.65 | 17.33 | 18.93 | 21.04 | 1 |
| 20 | 20.81 | 21.66 | 23.67 | 26.3 | ||||||
| 30 | 31.22 | 32.49 | Without Interference | Without Interference | ||||||
| 6 | 20 | 12 | 5.8 | 70 | 6 | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 40 | 110 | Without Interference | Without Interference | Without Interference | Without Interference | |||||
For Cutting Conditions, Refer to >>Click here.
Model Number
LN-DLC-ALHEM2S (Manufactured Product)
| Outer Diameter D | Length Under Neck ℓ1 1 mm Increment Designation | Flute Length ℓ | Under Neck Diameter d1 | Overall Length L | Shank Diameter d | Figure |
| 1.5 | 8 ~ 20 | 3 | 1.45 | 40 | 4 | 3 |
| 2 | 9 ~ 21 | 4 | 1.95 | 40 | 4 | 3 |
| 2.5 | 10 ~ 22 | 5 | 2.4 | 40 | 4 | 3 |
| 3 | 11 ~ 26 | 6 | 2.9 | 50 | 6 | 3 |
| 4 | 13 ~ 28 | 8 | 3.8 | 50 | 6 | 3 |
| 5 | 15 ~ 35 | 10 | 4.8 | 55 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.
More Information
