High-Speed Steel Corner C End Mill, 2-Flute / Short Model
Brand :
MISUMI
Caution
Product Description
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
| Model Number | Corner C 0.1 mm Increment Designation | Flute Length ℓ | Under Neck Angle θ | Overall Length L | Shank Diameter d | |
| Outer Diameter D | ||||||
CEM2S (Non-Coated Type) V-CEM2S (TiCN Coating Type) | 3 | 0.1 ~ 0.7 | 8 | 15° | 50 | 6 |
| 4 | 0.1 ~ 1.0 | 8 | 15° | 60 | 8 | |
| 5 | 0.1 ~ 1.0 | 10 | 15° | 60 | 8 | |
| 6 | 0.1 ~ 1.2 | 12 | 15° | 60 | 8 | |
| 7 | 0.1 ~ 1.4 | 14 | 15° | 60 | 10 | |
| 8 | 0.1 ~ 1.4 | 14 | 15° | 60 | 10 | |
| 9 | 0.1 ~ 2.0 | 18 | 15° | 70 | 10 | |
| 10 | 0.1 ~ 3.0 | 18 | — | 70 | 10 | |
| 11 | 0.1 ~ 3.0 | 22 | 15° | 80 | 12 | |
| 12 | 0.1 ~ 3.0 | 22 | — | 80 | 12 | |
| 13 | 0.1 ~ 3.5 | 26 | — | 85 | 12 | |
| 14 | 0.1 ~ 3.5 | 26 | 15° | 90 | 16 | |
| 15 | 0.1 ~ 4.0 | 30 | 15° | 95 | 16 | |
| 16 | 0.1 ~ 4.0 | 30 | — | 95 | 16 | |
| 18 | 0.1 ~ 4.0 | 34 | — | 95 | 16 | |
| 20 | 0.1 ~ 4.5 | 38 | — | 110 | 20 | |
| 22 | 0.1 ~ 4.5 | 45 | — | 110 | 20 | |
| 25 | 0.1 ~ 5.0 | 50 | — | 120 | 25 |
[ ! ]Since additional processing is given to EM2S, the flute length (ℓ) and total length (L) are somewhat shorter than the indicated dimensions.
For Cutting Conditions, Refer to >>Click here.