Carbide Runner Groove End Mill for Trapezoidal Runner Groove / Free Blade Diameter Specification Type / Fixed Blade Diameter Type / 2-flute
Brand :
MISUMI
Caution
Product Description
[Features]
·Essential item for plastic runner fluting
Selectable from free cutting diameter blade type and fixed cutting diameter blade diameter type
·Single angle θ 5°· 7°· 10°· 12°· 15° selectable
Specifications
Model Number
F-RTREM
| No. | Flute Diameter D 0.1 mm Increment Designation | Single Angle θ (Selection) | Corner R (Selection) | Blade Length ℓ | Overall Length L | Shank Diameter d | |||||||||||
| θ5° | θ7° | θ10° | θ12° | θ15° | θ5° | θ7° | θ10° | θ12° | θ15° | ||||||||
| 1.5 | 1.6 ~ 1.9 | 0 | 0.3 | 0.7 ~ 2.4 | 1.4 ~ 2.6 | 1.9 ~ 2.7 | 2.1 ~ 2.8 | 2.3 ~ 2.8 | 37 ~ 40 | 4 | 4 | 4 | 4 | 4 | |||
| 2 | 2.1 ~ 2.4 | 0 | 0.3 | 0.5 | 1.2 ~ 2.9 | 1.9 ~ 3.1 | 2.4 ~ 3.2 | 2.6 ~ 3.3 | 2.8 ~ 3.3 | 37 ~ 40 | 4 | 4 | 4 | 4 | 4 | ||
| 2.5 | 2.6 ~ 2.9 | 5° | 0 | 0.5 | 2.2 ~ 3.9 | 2.9 ~ 4.1 | 3.4 ~ 4.2 | 3.6 ~ 4.3 | 3.8 ~ 4.3 | 42 ~ 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3 | 3.1 ~ 3.4 | 7° | 0 | 0.5 | 2.7 ~ 4.4 | 3.4 ~ 4.6 | 3.9 ~ 4.7 | 4.1 ~ 4.8 | 4.3 ~ 4.8 | 42 ~ 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3.5 | 3.6 ~ 3.9 | 10° | 0 | 0.5 | 3.7 ~ 5.4 | 4.4 ~ 5.6 | 4.9 ~ 5.7 | 5.1 ~ 5.8 | 5.3 ~ 5.8 | 47 ~ 50 | 6 | 6 | 6 | 8 | 8 | ||
| 4 | 4.1 ~ 4.4 | 12° | 0 | 0.5 | 1 | 4.2 ~ 5.9 | 4.9 ~ 6.1 | 5.4 ~ 6.2 | 5.6 ~ 6.3 | 5.8 ~ 6.3 | 47 ~ 50 | 6 | 6 | 8 | 8 | 8 | |
| 4.5 | 4.6 ~ 4.9 | 15° | 0 | 0.5 | 1 | 5.2 ~ 6.9 | 5.9 ~ 7.1 | 6.4 ~ 7.2 | 6.6 ~ 7.3 | 6.8 ~ 7.3 | 52 ~ 55 | 6 | 8 | 8 | 8 | 10 | |
| 5 | 5.1 ~ 5.4 | 0 | 0.5 | 1 | 5.7 ~ 7.4 | 6.4 ~ 7.6 | 6.9 ~ 7.7 | 7.1 ~ 7.8 | 7.3 ~ 7.8 | 57 ~ 60 | 8 | 8 | 8 | 10 | 10 | ||
| 6 | 6.1 ~ 6.4 | 0 | 0.5 | 1 | 6.7 ~ 8.4 | 7.4 ~ 8.6 | 7.9 ~ 8.7 | 8.1 ~ 8.8 | 8.3 ~ 8.8 | 57 ~ 60 | 8 | 10 | 10 | 10 | 12 | ||
[ ! ]As the blade diameter is specified from RTREM (fixed blade diameter type), the blade length and total length will be shorter by the specified amount of the blade diameter.
Model Number
RTREM
| Flute Diameter D | Single Angle θ (Selection) | Corner R (Selection) | Blade Length ℓ | Overall Length L | Shank Diameter d | |||||||
| θ5° | θ7° | θ10° | θ12° | θ15° | ||||||||
| 1.5 | 0 | 0.3 | 3 | 40 | 4 | 4 | 4 | 4 | 4 | |||
| 2 | 0 | 0.3 | 0.5 | 3.5 | 40 | 4 | 4 | 4 | 4 | 4 | ||
| 2.5 | 5° | 0 | 0.5 | 4.5 | 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3 | 7° | 0 | 0.5 | 5 | 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3.5 | 10° | 0 | 0.5 | 6 | 50 | 6 | 6 | 6 | 8 | 8 | ||
| 4 | 12° | 0 | 0.5 | 1 | 6.5 | 50 | 6 | 6 | 8 | 8 | 8 | |
| 4.5 | 15° | 0 | 0.5 | 1 | 7.5 | 55 | 6 | 8 | 8 | 8 | 10 | |
| 5 | 0 | 0.5 | 1 | 8 | 60 | 8 | 8 | 8 | 10 | 10 | ||
| 6 | 0 | 0.5 | 1 | 9 | 60 | 8 | 10 | 10 | 10 | 12 | ||
More Information
Alterations
