Carbide Straight Edge Square End Mill, 2-flute / Neck Relief Type
Brand :
MISUMI
Caution
Product Description
[Features]
·Square neck relief type that supports efficient processing
·By specifying alteration, it is possible to select coating suitable for the work material
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Blade Length * ℓ 0.5 mm Increment Designation | Neck Length * ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | * Length Under Neck Specified Range ℓ2 | Overall Length L | ||
| Shank Diameter d | ||||||||
| BSZEM SZEM | LS-BSZEM LS-SZEM | |||||||
| BSZEM LS-BSZEM (Long Shank) SZEM LS-SZEM (Long Shank) | 4 | 3.01 ~4.00 | 3.0 ~ 10.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) Bottom Blade Shape>>P.608 | ℓ + ℓ1 ≤ 15 | 50 | 80 |
| 6 | 3.01 ~6.00 | 3.0 ~ 19.0 | ℓ + ℓ1 ≤ 24 | 60 | 90 | |||
| 8 | 4.01 ~8.00 | 3.0 ~ 23.0 | ℓ + ℓ1 ≤ 28 | 60 | 90 | |||
| 10 | 6.01 ~ 10.00 | 3.0 ~ 30.0 | ℓ + ℓ1 ≤ 35 | 80 | 120 | |||
| 12 | 8.01 ~ 12.00 | 3.0 ~ 31.0 | ℓ + ℓ1 ≤ 36 | 80 | 120 | |||
| 16 | 10.01 ~ 16.00 | 3.0 ~ 43.0 | ℓ + ℓ1 ≤ 48 | 100 | - | |||
* The combined dimensions of the blade length (ℓ) and neck length (ℓ1) will be within the length under neck specified range.
Alterations
